Had a good few hours in the garage this evening and got the sound system nearly buttoned up...
First we removed the Sub Box and painted it with some grey primer:

Next it was a couple of coats on black to seal the MDF:

Then we started with the FleckStone:
Whilst the paint on the Sub Box was drying we fitted the Amp Mount to the other rear quarter:

We then fed the wires thru the holes we drilled to guide them to the Amp:

Then it was a quick pre-twiddle of the settings on the front of the Amp:

Before we wired it up and screwed it to the board:
With the Amp mounted, we then went back to the Sub box whose paint was now dry. We re-mounted the Sub:

And then mounted it back into the car:

I think it looks

time better than the plain MDF... even though it will still be sitting behind the interior panels:

We will all know it’s there... and now we all know it looks better!!
Thanks for reading!!
