Fordy
Well-Known Member
Liners have been notched, the piston skirt barely protruded past the liner,
Few pictures as we all love pictures
so back in time moment a little,
wiring pictures not many tho,
New starter wiring crimped, slightly larger charging wire


CTM built and ported my head + athena gasket turned up


Keen on lookers will notice the turbo, inlet and carb water feeds blocked off, also made a new shorter boost pipe route for my intercooler

AND heres the pictures of the knocking noise investigation,



And the fix with chamfered edges internally and externally,


Just waiting for new liner seals, rod bolts and bearings and then it'll go back together, if it still knocks then my next post will be a forsale thread
Few pictures as we all love pictures
so back in time moment a little,
wiring pictures not many tho,
New starter wiring crimped, slightly larger charging wire


CTM built and ported my head + athena gasket turned up


Keen on lookers will notice the turbo, inlet and carb water feeds blocked off, also made a new shorter boost pipe route for my intercooler

AND heres the pictures of the knocking noise investigation,



And the fix with chamfered edges internally and externally,


Just waiting for new liner seals, rod bolts and bearings and then it'll go back together, if it still knocks then my next post will be a forsale thread