Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Hey people I had to bypass the fuel pump electrical system as it was not working properly can anybody give me any guidance on how to test this really properly so I can check whether it's working or not properly
ok so I've tested the sensor I'm getting a resistance reading across both pins and I am getting a voltage reading across the pins when the car is cranking over
I have tested the sensor for resistance which it has a and I've tested the voltage when the engine is cracked which there is so I'm assuming the sensor is good
Not even getting a spark from the main spark lead that comes from the ignition module I think that's the King lead funny you should say that when I try and start it the Speedo goes right the way up and then back down when I turn the key off
yeah something sounds abit off, the speedo should stay down. Sounds like something may be shorting out. The speedo is electric on these and has a cable that runs to the back of the gearbox. Have you been around there at all?
yeah something sounds abit off, the speedo should stay down. Sounds like something may be shorting out. The speedo is electric on these and has a cable that runs to the back of the gearbox. Have you been around there at all?
ok this is odd iv rewired the power plug as I had a spare 1 when the ignition is on there is now power at the plug but there doesn't seem to be a neutral at the relay for it when I jump a neutral from the battery to the relay the relay clicks and then shuts power off to the module plus still not got a spark any ideas?
I think it's the live that is switched not the neutral so to try it out put the neutral side of the aei wiring straight to ground - theres a wiring diagram posted above if you didnt see it
I think it's the live that is switched not the neutral so to try it out put the neutral side of the aei wiring straight to ground - theres a wiring diagram posted above if you didnt see it
I'm not sure what's going on I've got power at the aei now new HT leads new Disney New spark plugnow this car is haunted I swear I've checked the top dead centre sensor seems to be working the car was running in the morning any ideas
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.