There is more to life with TurboRenault.co.uk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Twingo Adey's Twingo GT (F4R+T 2.0ltr engine swap)

Managed to get 10min to make the new improved induction kit, 2 x 70mm 45 ali pipes, 70mm silicone joiner and 70mm ramair filter. Its tight but alot better than the diy bodge id done earlier. And it sounds aweaome with a little rev.20181221_171419.webp20181221_171433.webp20181221_170851.webp
 
Subtle change today, 20mm spacers all round to help fill out the arches a little. Nice little touch and another thing off the crimbo twingo list.

20181222_131538.webp20181222_133845.webp20181222_133837.webp20181222_135539.webp20181222_133852.webp20181222_134216.webp
 
Defo a fan of the f1s might be hard finding a set in 16 though? ive seen a few gt's on the 182 wheels and didn't think it suited? I ran with15 inch f1s on my old RS 20160119_154334.webp
 
Last edited:
probably, my lad is having one set for his wind, i told him to try gaviscon instead but he just called me a retard, so the other set will probably be available. not sure what ones he is having as there is a set of each type.
 
probably, my lad is having one set for his wind, i told him to try gaviscon instead but he just called me a retard, so the other set will probably be available. not sure what ones he is having as there is a set of each type.

properly bad dad jokes going on there. Each type???
 
Back
Top