Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
This section contains the archived boards. They should be read only. If you want a thread resurrecting please message admin and we can move into the live section
I have just cleaned my TB and ISCV as was idleing rough, but now ive done that the idle is sitting bout 1400 rpm and cant get it down, would anyone have a idea why this is? Cheers.
ok thats right, tap the ICV with a screwdriver handle, see iuf the revs drop then, if they do new icv time.
Also unplug the CTS, this will default it to runnign temp and stop cold start enrichment, if that drops the idle to normal then the CTS needs replaced.
In the gearbox end of the cylinder head. If it's a phase 1 or early phase 2, it's screwed directly into the head, if its a later phase 2, it's screwed into the thermostat housing. It has a white square plug on it.
To preempt your next question: Yes, there is also another sensor with a brown plug, that is NOT the one you want.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.