There is more to life with TurboRenault.co.uk
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Detailing my vee
- Thread starter craigy990
- Start date
Ok I no my vee is left out in the open as I converted our garage for my dad 
but Thursdays rain ruined my vee so thought I would post a couple of picks of before and after the "sand" mixed rain in wiltshire ! God I hope it doesn't do it again !! Just a note to all of you who have time to go to shows or need a quick 'spruce up ' I used to use 'showroom shine' but today I used Williams waterless cleaner - my car was filthy! ! No water just microfiber clothes - but I always clean wheel and tyres then under arches with water - so not all strictly waterless but you could [album]14276[/album]
[album]14277[/album]
[album]14278[/album]
[album]14279[/album]
but Thursdays rain ruined my vee so thought I would post a couple of picks of before and after the "sand" mixed rain in wiltshire ! God I hope it doesn't do it again !! Just a note to all of you who have time to go to shows or need a quick 'spruce up ' I used to use 'showroom shine' but today I used Williams waterless cleaner - my car was filthy! ! No water just microfiber clothes - but I always clean wheel and tyres then under arches with water - so not all strictly waterless but you could [album]14276[/album][album]14277[/album]
[album]14278[/album]
[album]14279[/album]
Oh just a note - this was 1st time since my valet - if you can call it that - I would say paint correction ! When I buffed up passenger side rear window I found lots of dribbles of the top coat used on the valet! Took me 1 hour to remove with a STANLEY KNIFE BLADE !!! very very carefully but nothing else would remove it ! I was plopping my pants that I might scratch the glass but I got 99% off just a smear left 
was gutted when 8 found it :rollseyes:
was gutted when 8 found it :rollseyes:Hi again chaps / chapesess - just an update - I parked my vee up yesterday after a long 3 mile drive after 3 weeks sat on drive - I looked into this "black to the future " my so called VALETER came back to correct my white residue issue a few months ago and it was poo !! So I am looking to remove the rubbers around the doors and shuttle panels and give it a good going over !! I know how to remove skuttle panels but with the door rubbers is it just " pull them off " or do the trims need removing ? I don't want to start it and get in a pickle with it !! I'd love to replace and uv stabilise them all before fitting on car - I have had suggestions before -ie peanut butter etc but this black to the future thread ended without a recommendation! I got to sort it as it drives me nuts !!! Lol ! White residue still coming back ! I presume the v6 is based on a 2 door standard clio so I could otder standard rubbers for a normal clio and replace all door rubbers quite cheap 
any advice as to the replacement rubbers would be much appreciated - worst are on car not door but would love to replace all !! Cheers in advance. (Still on old side pods, you lot keeping Scott busy !! Lol ! )
any advice as to the replacement rubbers would be much appreciated - worst are on car not door but would love to replace all !! Cheers in advance. (Still on old side pods, you lot keeping Scott busy !! Lol ! )