There is more to life with TurboRenault.co.uk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

21 Turbo Amrits Red Rocket

That's a perky one! Are you planning to play with cam timing, should bump you over 300bhp?
That's at 20psi so loads more boost to go yet. It also needs a better intercooler IMO and the exhaust system is 2.5" not 3 so I'd like to see that sorted too. Cam timing is playable-with that's something else we didn't touch on the mapping day. Its got the vernier there. Think its set in the middle ish, from whoever bench dyno'd it.
 
Good stuff, is the plan to get some use or carry on tweaking?
Quick refresh, what the spec?
Ferry developments head (France) think there might be a bigger valve in there, can't remember
Catcams billet cam and vernier
Super ductile liners
Wossner pistons
knife edged crank, stress relieved and shot peened rods
GT28RS
630cc injectors
 
Ferry developments head (France) think there might be a bigger valve in there, can't remember
Catcams billet cam and vernier
Super ductile liners
Wossner pistons
knife edged crank, stress relieved and shot peened rods
GT28RS
630cc injectors
Andy's right,
digging out the file the inlet valves are 46.6mm + dual valve springs with dural caps in the Ferry cylinder head and the crank had some magic applied to it!
Well done Dave that cigar is very close!
Best, John
 

Attachments

  • 003 Ferry head2.webp
    003 Ferry head2.webp
    32.6 KB · Views: 29
  • 003 Ferry head3.webp
    003 Ferry head3.webp
    47.6 KB · Views: 30
  • 21knifeedgedcrank001.webp
    21knifeedgedcrank001.webp
    33.9 KB · Views: 30
Andy's right,
digging out the file the inlet valves are 46.6mm + dual valve springs with dural caps in the Ferry cylinder head and the crank had some magic applied to it!
Well done Dave that cigar is very close!
Best, John

I was going to drop you an email this week, I guess I don't need to now :) Yeah not far off just needs a few corrections and tweaks and some more dyno time by the looks of it, though to be honest I think it best that it sees the road for a while before it gets tweaked further - thats Amrits choice though.
 
I was going to drop you an email this week, I guess I don't need to now :) Yeah not far off just needs a few corrections and tweaks and some more dyno time by the looks of it, though to be honest I think it best that it sees the road for a while before it gets tweaked further - thats Amrits choice though.
Ok Dave I shall do that .........2K miles should do it
 
Hey Amrit, look what I found while tidying my draws out.
20 years ago! uploads.tapatalk_cdn.com_20170509_fd3fb8263c57a59db07a613c511d87a2.webp


Sent from my iPhone using Tapatalk
Excellent.......
So your telling me that you've had this in your DRAWS for 20 yrs.......lol

Is that when you bought it ??
Can I have that please......? When I come show you the car again :ag:
 
Excellent.......
So your telling me that you've had this in your DRAWS for 20 yrs.......lol

Is that when you bought it ??
Can I have that please......? When I come show you the car again :ag:

Haha, Yes it's a bit crusty now..
Yes it is the original ad from the Auto Trader.
Little story about it too,
I'd been looking for 21T,s for a while,
The rule was, Mustn't be Red & must have leather..
After looking at about 6 in a month, all were grey or white, & shit..
Then none seemed to be for sale for a bit.
Then one day feeling desperate for one I looked through an old Auto Trader & just happen to look through the Prestige & luxury part & saw that ad!
So rang it & was in Farnham & I was the only caller... I wonder why?! [emoji38]
But it was RED & NO LEATHER!!
But by far the best I'd seen. Remember it feeling so tight to drive compared to others.
Think I paid 3300 from memory.
But yes, you can have it when I see you next.


Sent from my iPhone using Tapatalk
 
Back
Top