conversion

needed parts: Ipod classic 6.5g 160gb, anthracite, engraved for the provided field of application (is used only for in / the MRS2): navi antenna lengthened and soldered on mass: also the radio antenna, and additionally split for tmc: hidden install, and yes, reception...

Hi All, I have embarked on the above project! To fit power steering to my GTT. I have seen this post: http://turborenault.co.uk/threads/39/page-6#post-8111 But I have questions for anyone that has done this before... I have bought a Clio Mk I rack... Did you have to change the rear engine mount...

Hello everyone!does anybody know if an original williams ecu will work properly on a r19 16v with the following engine setup:f7r block,f7p head(with williams cams)and f7p std loom.The ecu plug pins are the same in number and locations between r19 16v and clio williams?

Thinking about buying a vw conversion flywheel from a 172 , now I'm wanting to fit it to the 5 turbo , right I no I have to make shafts and hyd clutch etc that's the easy bit ;) but what I'm unsure off is the flywheel trigger for the tdc ? And how I would get this working ? If that's poss ? Cheers

Just toying with the idea of doing this conversion as my engine went pop and I'm looking at doing a full rebuild on my C1J in Fluffy. I seem to remember somebody doing this conversion some time ago. Are there any guides or fundamental info that will point me in the right direction to get me...

Volvo 1.7 turbo engine , new t28 , lightened flywheel/ uprated clutch , bigger injectors/big throttle body/ wiring loom with chipped ecu , it's soposed to be cammed but haven't checked yet , £550 Can post on pallet for £60

Hi all any body converted their gordini / alpines to 4 stud? I am looking at using vented discs on the front, and also it gives more choice on wheels. Do the gt turbo hubs fit? Cheers gary

any one have any details of the conversion? also what power doed the meggy make when mapped up?

Hi I have a idea of turboing a mk1 1.9 d I've seen some projects on the internet and haven't really got any info on them can I use the manifold and turbo of the 19 or can I use something else also would the turbo hit the bulkhead in the clio? Thanks

My Clio 200 megane R26 engine conversion, started back in September 2012, although I loved the standard 200, after a while I started to get bored with the power, 200bhp just didn't do it for me. At first I was looking at the supercharger kit from Ktec racing, but unfortunately at the time they...

Here goes, I have single beams on my current car although I want to put a set of 16v twin beam head lamps in there, I do also have the headlamp wiring loom from the 16v however to transfer that across firstly is it plug and play and secondly is there a method to doing this instead of...

Okay here's what I have A donor PH2 16V cabby (no abs) complete car A 1.4 PH2 Saloon (I want this to be 16v spec) What can be used from the cabby and what will I need to buy All I want is the engine/box brake set up thrown into the 1.4, will I need to purchase mounts, pipes or anything else...

Hello, i am new to the site and was wondering if anyone could help/offer advice. I have a le car 2 turbo and wanted to convert it to injection using a Bosch K-jetronic mechanical system, so to avoid complicated wiring. Does anyone know if this has been done, and how easy it is? Thanks

hi i am currently doing an f7p conversion into my renault 5 which was a 1.1 fitted with a 1.7 8v engine, i think the engine code is a f2n or f2r heres a picture i have a few questions which will probably grow into more questions hopefully somebody is able to help me out a bit with, i...

Decided to put my 5 on hold and I have sold the engine, box and turbo out of it. My the oil pump on my 19 has packed in and the engine has started rattling extremely bad so I have decided it should take priority over the 5 because I would like it ready for next summer :). After selling my...

Just wondered if there are any companies out there that would supply and fit any of the following engines into my 19 16v cab. clio 197-200 Megane 225 Thinking of selling my full f7r engine and just giving my car to an engine conversion specialist over the winter. Cheers

Good day M8s, just a very quick question. is the carburetor and manifold of a C2J a direct fit or be directly mounted on a E7J to replace the current E7J's SPI. Thank in advance.

Ten M14 x 1.5 studs and nuts for the front of a R21 Turbo. Unused as they don't fit the wheels I want to use (I need special slimline bolts for the BK604's). These are 20mm longer allowing for spacers and bigger rims/different offsets. Can be cut down to length if so desired. Nuts are captive...

Ok im not that great with in debth technical but my mate is so i have a translater lol:D I have a ph 2 R19 16v chamade with a f7p engine the info i am after is what parts/components do i need for a turbo conversion i have heard it is relitively not that bad, but i just would like to know what...

Hi guys, i have bought a Renault 5 GTE, but the GTE's have ph1 suspsension. And almost all affordable suspension kits Like the Apex kit are for a ph2.. So there for i would like to know what i need to convert it to ph2 struts.. Of course i need the strut and springs, and the top mounts...