Turbo Technics hybrid turbo [sold]

[DaveL485]

Clutch hydraulics?

Very in demand in my world of late. Master/slave/pipework/feed from res. Also clutch forks, any cond, for development of a 'light pedal' conversion...

 

[rob_quadra_21]

whereabouts r u then joff? wots the name of th place u live?

 

[joff]

Clutch hydraulics?

Very in demand in my world of late. Master/slave/pipework/feed from res. Also clutch forks, any cond, for development of a 'light pedal' conversion...

Need to check see what i've got now, cos i'll have to convert the quadra to ph1.

Which bits do I need to swap over? Master + slave + pipework? Was there something i read about having to "trim" the shaft down a little?

Joff

 

[DaveL485]

Feed from the resovoir, master, pipework and slave, then swap the dust cover on the ph1 cyl for the ph2 one (it will fit) and use the ph2 pin as it fits in the fork better. Then you'll need to change the clutch pedal as well as the master fitting is different and then remove the footrest as itll foul the ph1 pedal unless you're lucky enough to have a G-plate ph2 one which was fitted with ph1 hydraulics AND a footrest....

Yeah?

 

[julianhh]

PM

Joff, you have a PM

J