Easy and lucrative.Everybody local just wants to do bumpers and other small jobs paid by insurance
There is more to life with TurboRenault.co.uk
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
5 GT Turbo Renault 5 GT Turbo Phase 1 Full restoration from Slovenia
- Thread starter Gianni_D
- Start date
- Featured
-
- Tags
- restoration
DaveL485
Staff member
Its the same everywhere now, its a real struggle to find anywhere that doesnt charge an absolute fortune.
Gianni_D
Active Member
Started repairing roof headliner.
It had some rips on the top layer, so I reinforced it with a few sheets of fiberglass.
After that i decided to fully separate the actual headliner, foam layer and the top composite layer as the foam is turning into dust.
So I cleaned up everything, now just need to buy a sheet of 5mm thick foam, and glue it on. I also need to do something with the inner felt layer as its dirty, has different shades of grey because of sun,... Maybe dye it black or something like that.
It had some rips on the top layer, so I reinforced it with a few sheets of fiberglass.
After that i decided to fully separate the actual headliner, foam layer and the top composite layer as the foam is turning into dust.
So I cleaned up everything, now just need to buy a sheet of 5mm thick foam, and glue it on. I also need to do something with the inner felt layer as its dirty, has different shades of grey because of sun,... Maybe dye it black or something like that.
Solo fitted.
Didnt use face to try and fit.
You only need to spray a small amount infront of you and use a paint roller to keep flat.
DaveL485
Staff member
Gianni_D
Active Member
Thanks for the advice. Either way, I'll probably do it with my dad as I really don't want to fuck it up
After that I'm thinking of painting the headliner black as It's really dirty right now and there is no way I'll clean it off. I'm thinking of using leather-vinyl spray paint. Anyone got experience using something like that?
Today I welded the donor door holes from the plastic bumper strip. Luckily it didn't warp much and the small amount id did, it warped inside, so there will be really minimal bondo needed to straighten everything out.
After that I'm thinking of painting the headliner black as It's really dirty right now and there is no way I'll clean it off. I'm thinking of using leather-vinyl spray paint. Anyone got experience using something like that?
Today I welded the donor door holes from the plastic bumper strip. Luckily it didn't warp much and the small amount id did, it warped inside, so there will be really minimal bondo needed to straighten everything out.
I of course never bodge anything.
However, if I were I would use "regular" rattle can black for the headliner. You don't need anything fancy.
Also works well on boot parcel shelfs so I am told ..
Gianni_D
Active Member
So I glued new foam, just need to trim it next time. It holds okay but the original backing cardboard is quite wavy and not even so I will need to stretch everything once I'll glue it to the roof. Still need to glue the actual liner and paint it.
Next I visited a friend and sand blasted my front Brembos since I decided to do a full rebuild. A problem with this is that there isn't any store outside UK selling my specific dust seals.. Bummer.
Also this was waiting in the garage. Just a couple of small details and it will be complete. Full restoration.
Next I visited a friend and sand blasted my front Brembos since I decided to do a full rebuild. A problem with this is that there isn't any store outside UK selling my specific dust seals.. Bummer.
Also this was waiting in the garage. Just a couple of small details and it will be complete. Full restoration.
Gianni_D
Active Member
Yesterday I repainted the front calipers. Still need to do the new rears and then some clear coat. Also need to buy Brembo stickers for the front pair.
I have yet to buy new dust boots as they seems a bit overpriced (200 eur for 8 new ones). Need to find some other place to buy them.
I have yet to buy new dust boots as they seems a bit overpriced (200 eur for 8 new ones). Need to find some other place to buy them.
DaveL485
Staff member
I used this kit.
Front Brake Caliper Rebuild Kit For Renault Clio RS 197 200 Sport (For Brembo) | eBay
2x Front brake caliper repair kits / seals 8x Front brake caliper pistons - Anodised aluminium 4x Front brake caliper bleed nipples / screws (Mild steel) Front brake pad fitting kit / pins and spring plates Kit contains parts for two brake calipers - contents pictured Includes a Free sachet of...
www.ebay.co.uk
I can buy it, have it delivered here and send it on to you, no problem, as long as you cover the costs - plus you may have to pay import duty at your end.
Gianni_D
Active Member
thanks, I think I got the right parts on order now. We will see once they get to me.
I used this kit.
Front Brake Caliper Rebuild Kit For Renault Clio RS 197 200 Sport (For Brembo) | eBay
2x Front brake caliper repair kits / seals 8x Front brake caliper pistons - Anodised aluminium 4x Front brake caliper bleed nipples / screws (Mild steel) Front brake pad fitting kit / pins and spring plates Kit contains parts for two brake calipers - contents pictured Includes a Free sachet of...www.ebay.co.uk
I can buy it, have it delivered here and send it on to you, no problem, as long as you cover the costs - plus you may have to pay import duty at your end.ght pat
Similar threads
