So - a Somewhat successful/terrible day at mapping down at EFi.
Booked in with EFi today for mapping the car, as i said earlier in the thread, it was mapped to 310bhp, and i was just wanting to make sure everything was ok and to get a map on by Chris. Well this is were it went oddly - turns out the car / ECU had been flashed a good few times, and infact was running a standard map (Good News here is that its a healthy engine) Looks like its been mapped and modded and then pretty much put back to stock, and to get through emissions / fitting a standard cat back in place, they have just put a Sports Cat in (Looks to be a De-cat Previous - this was taken out the standard map)
Once Chris had looked at this and checked the car with a few runs it was time for mapping, well as with previous car, he had to adjust the actuator as it was not making the correct Psi / Boost, So Chris fiddled with this and started again. Was still showing down on were it should be, so potentially a boost leak somewhere, but nothing obvious.
But then disaster to a point - Once pushing the car / Clutch slip

What it looks like has happened, is that a standard map has been put back in possibly because of this, as it was not present on the runs before mapping. The good news with this, if you can call it that, is the Boost Psi came back up to where it should be. So this may have something to do with the clutch slipping on the rollers.
So where i'm at is the car has been mapped, Good BHP Number, but Chris has brought the torque back a touch due the clutch starting to slip. So good and bad, to be fair its good to know i need a clutch before it actually goes, and can save the pennies for it, as driving normally (Daily Commute) i won't actually notice it, but gunning it round the B Roads i will.
So a question for the knowledgeable on here, Is it worth doing the flywheel/slave cylinder as well as the clutch, or just get away with a clutch kit? in an ideal world i'd do it all, but the costs for the Fly wheel are crazy, and certainly no rattle form the fly etc. Just purely slip.
Will post the results up from the dyno when i get 5 - also picked up 2 x Steev Alloys on the way back up the road with nearly new tyres on for £150 - just need another 2 and then i'll refurb them.
Ian
