There is more to life with TurboRenault.co.uk
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Marks RX7 - lets break a rotary.
- Thread starter Mark Davis
- Start date
Duncan Grier
Well-Known Member
I so want my loom to be this std.......end of!
Same!
Was looking over a Ferrari 458 LM this weekend and all I could think of was this thread!
Mark Davis
Brapmaster extraordinaire
I’ll have some more pics to share next week hopefully
Mark Davis
Brapmaster extraordinaire
Nothing further to add other than WMI tank fitted in place of the OE rear washer tank. Works well as I deleted the rear wiper when I had the car painted. Holds about 8 litres of fluid and has built in level sensor, I just need to knock up a fitting at the bottom of the tank to feed the pump.
Approximately 2 weeks until loom is completed, will update with photos when I can.
It’s looking like an August first start now.
Approximately 2 weeks until loom is completed, will update with photos when I can.
It’s looking like an August first start now.
Mark Davis
Brapmaster extraordinaire
Still waiting for wiring to be completed and tested, there’s a possibility that could be the end of this week.
Filler neck sorted with two x AN10 fittings for catch can and 1/8NPT return for turbo oil pressure regulator. Gave it a quick coat of black.
I’ve ordered coolant & lines for oil and turbo feed.
Next up need some custom ign leads, oil and plugs.
Filler neck sorted with two x AN10 fittings for catch can and 1/8NPT return for turbo oil pressure regulator. Gave it a quick coat of black.
I’ve ordered coolant & lines for oil and turbo feed.
Next up need some custom ign leads, oil and plugs.
Mark Davis
Brapmaster extraordinaire
Loom ready for bench testing.
Mark Davis
Brapmaster extraordinaire
Coolant arrived too along with lines and fittings for oil feed to engine and turbo.
Mark Davis
Brapmaster extraordinaire
Lots of troubleshooting and testing between loom builder and tuner today.
Dash and keypad all working and lit up. All sensors are good. Next up install loom to car.
Dash and keypad all working and lit up. All sensors are good. Next up install loom to car.
Steve Swan
Well-Known Member
That all looks wildly expensive!!
Mark Davis
Brapmaster extraordinaire
It way way out of hand.
Steve Swan
Well-Known Member
Here for a good time, not a long time...
Dont write down the costs.It way way out of hand.
When you buy and expensive part and your wife says you will regret buying that in the morning get up at 1201. Your a problem solver like that.
Mark Davis
Brapmaster extraordinaire
Testing of DBW Dorito Design set up.
All working.
All working.
Mark Davis
Brapmaster extraordinaire
Short overview before fitting Monday.
Mark Davis
Brapmaster extraordinaire
Very impressed with his work. If you need a proper loom and have the budget go see Matt at Level Motorsport Wiring.
Mark Davis
Brapmaster extraordinaire
Mock up and install day. Almost there.
Duncan Grier
Well-Known Member
Exciting times 
Steve Swan
Well-Known Member
Lovely..
Similar threads
