21 Turbo lower wishbone query 21t

[plvehicles]

does anyone know if the shape of the lower arm is correct, both front wheels are back, but unsure if its the lower arm or the fact all the bushes have moved in the arm? don't want to push the bushes back in if im waisting my time with a bent arm. must have gone over a high kerb or something similar because all bushes have moved a fair bit but are still tight in the arms. any input will be great as I can only get one arm new from Renault the other is NLA
cheers
Pete

 

[Haz]

Elton John is straighter than that! Must have had some whack!
There's a pair in with @jamesy12345 spares here, but @Craig Righton must have got them for a reason?

 

[plvehicles]

I thought that but also looking at the angle of the antiroll bar comes in at to meet the arm, it might not be too far off, if off at all??????

 

[Haz]

 

[plvehicles]

ahhhhhh yep mine are fucked then
you got any haz???

 

[Haz]

Theres a pair in with his spares. I've just looked and the quadra are different so not sure why they are with the car?
Any ideas @DaveL485 ?
If they can't be used I'm sure he'll sell to recoupe some cash

 

[Andyquadra]

Theres a pair in with his spares. I've just looked and the quadra are different so not sure why they are with the car?
Any ideas @DaveL485 ?
If they can't be used I'm sure he'll sell to recoupe some cash

the only difference is that ph2/3 wishbones are cast and ph1's are presses or is it the other way round. Both will fit
http://www.ebay.co.uk/itm/Renault-21-Saloon-L48-2-0-Turbo-4X4-Left-Hand-Front-Lower-Wishbone-/371074349370?fits=Car+Make:Renault|Model:21&hash=item5665c1393a:g:mAMAAOxyx0JTjGoZ
http://www.ebay.co.uk/itm/Renault-21-Saloon-L48-2-0-Turbo-4X4-Right-Hand-Front-Lower-Wishbone-/291160109599?fits=Car+Make:Renault|Model:21&hash=item43ca7eb21f:g:AXcAAOxyhS9TjGpB
should fit, but check first

 

[jamesc]

yes can sell mine if the ones on the car are good....hard to tell that unless they are obviously fucked, since the car is off the road

 

[DaveL485]

I reckon the one on your car is a non-turbo wishbone



If it was me, i'd buy two new, correct wishbones at about £40 each and get the Powerflex wishbone and ARB bush kit and fit those in while it's in bits.

 

[DaveL485]

I can only get one arm new from Renault the other is NLA

Pressed steel ones are all over eBay as a non-OE part, but wont have the Turbo spec bushes hence the suggestion on Polybushes.