There is more to life with TurboRenault.co.uk
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
1st coil! And few other bits of advice.
- Thread starter Invexis-
- Start date
Well I got home from work and set about doing the coil.
I didn't have a 8mm socket for a 3/8 drive ratchet. But I did for my 1/4 drive so I just used that. Read the guide, and I jumped straight to the coil suggested above, behind drivers seat and bingo that was the one. Took about 20mins all in all, been out for a little run too. What an easy job! If anything is to go wrong with the car I hope it's just them!
The only thing, it mentioned torque settings, obvious I haven't been able to set it to the required tourqe? How vital is it on these?
I'm going to make myself a little kit up, consisting of coils, ratchet, socket, extension and a pair of disposable gloves. Oh and a little screw driver to easy the clip off.
Very pleased it's back to it's norml self.
I didn't have a 8mm socket for a 3/8 drive ratchet. But I did for my 1/4 drive so I just used that. Read the guide, and I jumped straight to the coil suggested above, behind drivers seat and bingo that was the one. Took about 20mins all in all, been out for a little run too. What an easy job! If anything is to go wrong with the car I hope it's just them!
The only thing, it mentioned torque settings, obvious I haven't been able to set it to the required tourqe? How vital is it on these?
I'm going to make myself a little kit up, consisting of coils, ratchet, socket, extension and a pair of disposable gloves. Oh and a little screw driver to easy the clip off.
Very pleased it's back to it's norml self.
Similar threads
- Question
