There is more to life with TurboRenault.co.uk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • This section contains the archived boards. They should be read only. If you want a thread resurrecting please message admin and we can move into the live section

Urgent help needed MOT at 3pm!!!

selecta701

New Member
Hi, I really need some help, I am fitting rear disks for the MOT today but the dam discs wont fit! They are to big in the center, not the hole but when the discs layed flat on the ground its the ground to the highest point, my old discs were 37, but the ones I have are 47, the car place told me 47 are the ones that all the other companys are listing, apart from that the other sizes are fine, I have looked on the knowledge page but it dont give me this dimesion, any ideas?
 
Ventilated disks at rear (300mm)

65832fcfe2d4b1f5a2fe9860e62b6b00.jpg


All I can find for you.
 
Last edited by a moderator:
So from our conversation the discs you've been supplied are too deep at the hub. You need 37mm and all the motor factors list/supply 47mm ones. As discussed we will try to find a supplier for the proper size discs (non ££Reneault££)

All those with non Renault Rear discs please post up your findings.

Update:

Scott tells me only Renault OE discs fit on the rear.
 
Back
Top