There is more to life with TurboRenault.co.uk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • This section contains the archived boards. They should be read only. If you want a thread resurrecting please message admin and we can move into the live section

Project: MRS2: Conversion Quaife ATB & Metal Catalyst

arno samimi

Active Member
all needed parts:

imagizer.imageshack.us_v2_640x480q90_538_9ABeWP.webp

removed from above:

imagizer.imageshack.us_v2_640x480q90_538_nYWnTm.webp

also from below:

imagizer.imageshack.us_v2_640x480q90_905_Ahh7mS.webp

already out:

imagizer.imageshack.us_v2_640x480q90_540_Gba9o1.webp

imagizer.imageshack.us_v2_640x480q90_661_fRkyf1.webp

fixed on the holder:

imagizer.imageshack.us_v2_640x480q90_540_nOKUOZ.webp

dissembled is fast:

imagizer.imageshack.us_v2_640x480q90_909_AVIeSg.webp

imagizer.imageshack.us_v2_640x480q90_537_wZc4tC.webp

unpacked the ATB, unscrewed the crown:

imagizer.imageshack.us_v2_640x480q90_901_DxDHle.webp

imagizer.imageshack.us_v2_640x480q90_909_JzaFFk.webp

mounted new bearings, screwed the crown:

imagizer.imageshack.us_v2_640x480q90_631_WZYR8W.webp

imagizer.imageshack.us_v2_640x480q90_538_ELmLp7.webp

inside and is already turning by itself:

imagizer.imageshack.us_v2_640x480q90_912_zauRQs.webp

mounted the other parts:

imagizer.imageshack.us_v2_640x480q90_633_BZRQDA.webp

all cleaned, apply the sealant and mounted the cover, mounted the outer parts and ready to install in the MRS2:

imagizer.imageshack.us_v2_640x480q90_913_RKeAad.webp

imagizer.imageshack.us_v2_640x480q90_538_qfhvqT.webp

back into it:

imagizer.imageshack.us_v2_640x480q90_540_IuJ9Nf.webp

all mounted from below:

imagizer.imageshack.us_v2_640x480q90_661_GHddFn.webp

also from above:

imagizer.imageshack.us_v2_640x480q90_673_4W1leJ.webp

imagizer.imageshack.us_v2_640x480q90_661_U17hAw.webp

again a familiar image:

imagizer.imageshack.us_v2_640x480q90_903_Hy1ngG.webp

finish:

imagizer.imageshack.us_v2_640x480q90_631_XFsCGh.webp

not to forget to fill in the lifetime warranty card and send it to quaife:

imagizer.imageshack.us_v2_640x480q90_673_EoXno9.webp

at the same time installed the metal catalyst:

yet installed here, space completely filled:

imagizer.imageshack.us_v2_640x480q90_673_SaIZYu.webp

without mounted gearbox and front axle, very easy to dissamble:

imagizer.imageshack.us_v2_640x480q90_538_oUobJM.webp

conversion both lambda sensors:

imagizer.imageshack.us_v2_640x480q90_673_f1pzpg.webp

mounted the metal catalyst and it remains very much space:

imagizer.imageshack.us_v2_640x480q90_537_walrcO.webp

from above also all good. all connections are in the right place:

imagizer.imageshack.us_v2_640x480q90_537_f75GAk.webp

mounted the shield, looks like original, finish:

imagizer.imageshack.us_v2_640x480q90_913_dyUMmo.webp
 
Back
Top