There is more to life with TurboRenault.co.uk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • This section contains the archived boards. They should be read only. If you want a thread resurrecting please message admin and we can move into the live section

Peugeot 206cc Alloys

Big man

Member
Will the above 16inch wheels fit my standard cabby! they are standar factory multi spoke form the 206cc cabriolet and new with tyres for £100

What you guys reckon.... a straight replacement for current factory cabby alloys??

cheers

bm
 
Yup, the holes are further apart from the wheel's centre ( this is technically called the PCD ). Alloys from Rover 25/45 etc, Vauxhall 4 stud and some Honda's should fit, but always test fit them on the car, as the spigot hole may be too small.
 
Yeah they are the wrong stud pattern aswell, they are 4x108 renaults are 4x100 in most cases

Prab
 
not only are they the wrong stud pattern, they are also totally the wrong offset..

pugs run a real low offset on cars like the 106/206/306 etc, ET15-18 IIRc... same as an escort cossie.

in laymans terms... even if they were the correct stud pattern, they would stick out 20mm more than the std ones either side
 
Back
Top