Hi guys, need some help as to where to look for a problem, had the turbo rebuilt twice with the same effect, once all is connected I have a lot of oil getting in the turbo, when I put the carburator off, put it directly on the intake manifold, I can have it running for hours with no oil coming through... whenever I put the carburator where it should be, it happens again... maybe I have some breathing pipes attached the wrong way around, or its in the carb not set properly, but cant seem to find a solition, engine is freshly rebuilt as well, was running without the turbo all fine, no oil smoke, any ideas what I could have done wrong ? Did a 1mm gap on the throttle on the carb but then it revs to 5000 rpm so thats not going to work
seeems like the vacuum makes the turbo suck the oil through.... same happens whatever way around I attach the breathing pipes, or when they are disconnected as well, would appreciate your help greatly, good day to all of you here!
