handbrake adjuster

[andy21]

anyone know what the handbrake adjuster looks like cause i thinks mine is knackered the handbrake lever in car goes all way to the stop any ideas:icon_mad:

 

[DaveL485]

Under the car, off the back of the handbrake rod. 11mm locknut and a 13mm wind-up fitting to tension the cable. Can't miss it. Aits above the exhaust and it's a **** to get to.

 

[andy21]

found that they is a thirteen mm nut and like a brass thumb nut on the other side of it does that sound familiar

 

[danb]

Under the car, off the back of the handbrake rod. 11mm locknut and a 13mm wind-up fitting to tension the cable. Can't miss it. Aits above the exhaust and it's a **** to get to.

and even more of a c*ck head to get to if its a quadra LOL

 

[DaveL485]

and even more of a c*ck head to get to if its a quadra LOL

Easier, imo. Drop the prop center bearing and there's more room in the bigger tunnel.

 

[andy21]

its 2wd one and its still a c***k might try it with new cables

 

[danb]

Easier, imo. Drop the prop center bearing and there's more room in the bigger tunnel.

nahhh couldnt be doing with that, so exhaust and prop in the way - stubby spanners are needed!

its a pain on either model

 

[shep]

i dropped the exhaust down to do mine i gave up getting not even half turns