D
devonquadra
Connect it to the 2 connector's on the cutout, Useing the continuity setting. As you increase the pressure the cutout will either make contact or break it I can't remember off my head right now. When you've adjusted it to the pressure you want it to cut out at, that's it job done!
Obviously you need to use a pump with a fairly decent guage on it! And make up some sort of pipe to use, but that's a good way of doing it. If your running standard set up then set it at about 17 or 18 psi.
Obviously you need to use a pump with a fairly decent guage on it! And make up some sort of pipe to use, but that's a good way of doing it. If your running standard set up then set it at about 17 or 18 psi.