Can t start my meglio

[daviddavefurlong]

Hi all I am in the middle of a meglio conversion, I ve followed the steps on an older post on here.
R26 ecu immobiliser turned off, have ignition lights ,steering lock come off
But no start .
Have checked all earth's, swapped relays
Etc and no joy
I put live down the grey starter wire from the fuse panel and the starter is working
Any help at this stage would be great

 

[S24NRC]

Crank sensor on the gearbox and the wiring diagram on here had a correction related to the starter motor wiring being wrong on the initial diagram that caught me out.

 

[daviddavefurlong]

Ya it's dosen t seem to be the wiring to starter as I by pass the control box and starter turns over ,ignition comes on put no turn over

 

[Mark_L]

Mine wouldn’t turn over when I first did mine. I somehow blew the starter fuse?

 

[Brigsy]

When you say immobiliser is turned off, has it been cloned from oem ecu to the r26 ecu.

Be able to find out on clip if starting is authorised to give you an idea whats going on

 

[daviddavefurlong]

The guy I used ,put a julie universal to over ride the immobiliser on the r26 ecu ,is that correct

 

[Adey]

The guy I used ,put a julie universal to over ride the immobiliser on the r26 ecu ,is that correct

i know of someone else who used a julie emulator and had no end of trouble.

 

[Brigsy]

The guy I used ,put a julie universal to over ride the immobiliser on the r26 ecu ,is that correct

Get that gone. Get the immobiliser cloned off your original ecu to the megane one.

 

[DaveL485]

Get that gone. Get the immobiliser cloned off your original ecu to the megane one.

Yes, do this, the Clio imob chip is the same and it clones. EFI Parts do it.

 

[S24NRC]

Another vote for EFI. Sent mine off and worked turn key once wiring issues were resolved.