Twingo Boosted Twingo RS x2

[JOHNROGERS]

So all went well pulling the engine took us 20 mins tops, now to remove the tubular mani/turbo etc ready for when I get the forged one back.

Started to sand down the engine bay ready for a quick coat of paint as they’re painted terribly from factory nothing matches. Clean up all the ancillaries throughout the week too.

RRR engineering have also started to make me a plug and play adapter for the ecumasters ecu which is perfect makes everything that little bit easier and that’s one less thing to worry about

 

[JOHNROGERS]

Been a little while since I’ve posted any updates on here, new engine was picked up and has sat in the boot of the bm since as I’ve had no time to crack on with it due to jobs on the house.

However this weekend I’ve cracked on, clutch and box all glued on, intake manifold bolted up, stud and nut conversion for the coil packs, swapped over all the ancillary’s from the old engine.

Just waiting for the new turbo cold side to be welded on a 90 degree before I can drop it back in as there’s piss all room behind there once it’s in.

Should be running in the next 2 weeks, bed in the rings and then get it down to efi to be mapped on the ecu master emu black and make some power!