There is more to life with TurboRenault.co.uk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • This section contains the archived boards. They should be read only. If you want a thread resurrecting please message admin and we can move into the live section

2litre f7r meggy head

jay

Active Member
as above, wanted asap. doesnt have to be mint but im going to rebuild it antway, dont need cams either

what you got peeps?
 
how much are you offering?

I have a full head, and i got half way through porting it I think, I would need to check.
 
depends how much you asking? it is a meggy head reason bein im binning the renault ignition and using a edis 4 from a ford to convert it to coil packs (wasted spark) and running mega jolt
 
i'm asking £15k. What our willing to pay will no doubt differ substantially so what you willing to offer.

You put a title for a megane head I replied so do you think its a megane head I have or do you think i'm an average muppet?

I think I used 1 pulley on another engien but the 1.8 pulleys are the same fitment apart from the inlet cam pulley which switches the cam sensor not that you will need that.

I need to check but theres no chance i can get to the thing in this weather.
 
I too have a megane F7R Head for sale, its stripped right down at the mo, some clean up work has been done to it, but no lifters or gaskets, Bidderman bought the new lifters I had bought for the head and I had not got around to ordering a gasket kit.
This head will also take the cams from the 1.8 16v F7P and Williams cams (some meggy heads dont as Neal discovered)
I also have a pair of brand new cam belt pulleys for the head available as well.
 
i'm asking £15k. What our willing to pay will no doubt differ substantially so what you willing to offer.

You put a title for a megane head I replied so do you think its a megane head I have or do you think i'm an average muppet?

I think I used 1 pulley on another engien but the 1.8 pulleys are the same fitment apart from the inlet cam pulley which switches the cam sensor not that you will need that.

I need to check but theres no chance i can get to the thing in this weather.


never intended to make out your a muppett, reason i asked was just to clarify it is a meggy head, now we have that clear im willing to pay upto £50.
 
Back
Top