renault 5 gt turbo

This GT Turbo Cup car will be the cleanest and best anywhere - It has zero damage and is perfectly straight. It was reshelled into a BRAND NEW shell in 1999 at great expense (it was one of the last brand new shells bought from Renault UK, we have the other for sale soon) and has only done a...

I'm looking for a 5 turbo rolling shell project to build up with a b18ft. Rolling shell with glass and id is good enough. Not too worried about paintwork or interior. Would like it as cheap as possible if there is such a thing please. Thanx, Dave

2x pair of sub frames for both seats £70

Hi Decided to give my Renault 5 B18ft engine a quick service ready for MOT, will be first for several years. 3 plugs out no dramas, fourth was giving me jip so I soaked it in wd40 for half hour and cracked it off with breaker bar... Whoops... Its kind of half in and half out...

Hi there everyone. I have decided to make a Build Thread for my Renault 5 TL RIO which i am doing a B18FT conversion on I'm sure some of you guys have seen a couple of pictures posted on here. from now on I'm going to post updates and pictures of my progress on here. The Build is almost...

Well I'm a little stumped, half way through removing all the calipers to have them refurbished, I couldn't work out how to remove the handbrake cable that connects to the rear calipers. I managed to get the cable end crimp over the holding arm at the very end but can't work out how this then...

Hi everyone. I am in need of a set of head studs which are uprated. what is everyone else using as i was after a set of ARP head studs and big end bolts for my B18FT Engine. but was unable to find any on there website. :declare.gif::negative.gif:

Hi there does anyone know if a quaife ATB LSD from a Renault 5 GT Turbo will fit a B18ft Gearbox. I have been lead to believe that both gearboxes are pretty much the same but the Volvo one is slightly better. any help would be greatly appreciated. Kind regards josh

Is it possible to adjust the float height on a 32dis carb. If so what is the correct height?

looking to replace my radiator as it is looking a bit tired now so before I get a leak looking to replace. Also with running a lot of boost and power looking for something to help keep things cooler when pushing it. so looking for advice on what other people are using and are the alloy ones any...

Needs a good clean, has a few "cigarette burns" and ripped at back corner of the rear drivers side foot well. I'm not willing to post so pick up only please. Located in Bearwood, Birmingham £30

as above thanks matt

Evening all My GT turbo has a faulty headlight relay, which I need to replace. However it is a 7 pin item rather than the normal 4/5. Does anybody know whet the extra 2 connections are? The haynes manual didn't seem to contain it. I didn't have a spare one to hand, but it looks like a 5 pin...

Thought I'd upload photos on here, wont be much fluffy writing just parts and photos Whacked a T28 on my car and run 25psi for a bit needless to say it was very enjoyable but engine that was built 4 years ago didnt like the extra strain and wear. So cracked some inlet collets, valve collet...

Some of you may remember me and my car from another Renault site. Now it's getting to the exciting part of the restoration I thought I would also put a post up here as well for people to have a look at. Quick condensed history. I purchase my 5 in 1997 from the original owner. I drove it round...

Hey everyone, any tips on this? The remote lights up, so I suppose its working, but it does nothing on the car.

As title really. There was R5 Cup championships elsewhere in Europe, not just the UK, but anyone got details of the car specs? Devil strut brace is always mentioned, but I've a beefy Matter one (has a matter ID tag etc) off a Cup car. I know Matter made strut braces for works Porsche race cars...

Hi, I require the following parts for a Renault 5 Gt Turbo and wondered if anyone could help: External and Internal door window seals both sides. Rear 1/4 Hinges Boot Latch Bonnet Latch Dash Trim (The piece that holds the clocks in place) Plastic Trim under the rear lights both sides Clocks...

Afternoon all, So I am going to start buying the kit required for an EFI conversion starting with the adaptronic kit sold by EFI Parts. C1J (R5 GTT & R11 Turbo) EFI kit - EFI-Parts.co.uk: Connectors, Sensors, Trigger wheels, Wideband, Adaptronic, Zeitronix, AEM I just need a little advice...

has anybody ever fitted a second turbo to a renault 5 gt?? Just thinking about starting a project.....