renault 5 gt turbo

Hi guys, has anyone got a spare exhaust manifold for sale? I've just noticed that my stainless manifold is cracked and apparently they always do. Anyway I'm in birmingham

Hey guys. I have gone to change the fuel tank today. Dropped the old leaking tank out, to find that the new one has a smaller fitting hole for the sender unit, only by about 5mm. The new tank I have did not have a sender unit with it. So now I'm stuck! I have a good tank with no sender, and...

I have been keeping a campus shell stored for years to build a sleeper. It's now time to start the built. Basically I am using what I learned from building my last twiin engined R5 to build a better one. The goal is to I'm install two turboed F4R engines with lots of cooling, good suspension...

just a few pipes to find and it's ready to run

Hi guys. I know this is a BIG ask, However, nothing ventured nothing gained. I'm after a pair of 5 Gt turbo key fobs with sender unit. I'd settle for the Clio ones if need be, but the genuine ones would be the preference. Thanks.

Hi people, I need a new water pump and engine gasket set. Is cgb the best place to buy from or is there an alternative? I'm looking at the top end gasket set with blue seal hg and upgraded bolts. I've only looked at eBay and cgb are the cheapest on there. Look at this on eBay RENAULT 5 GT...

started to have a tidy up of my engine bay and have been looking at changing some of the pipes i never did. i have come across one i think it is the one for the water pump to the header tank and has a number of 341 on it. it just looks to small in diameter but fits in perfect. can anyone who has...

Has anyone been lucky with locating a supplier for the original phase one, black seat cloth material?. Had an accident with one of mine.....

Hi all. Following a recent mis-hap, involving a brake pad jumping out of a rear calliper. I now have a nice amount of paint missing on the inside of my drivers side rear wheel. I'm after anyone selling a single complete alloy raider or otherwise. That way I can get it sorted without have to...

working that is... Not sure where I'm going wrong. The pump spins when you press the stalk within the car, however the horn will not sound. If I connect the pump direct to the battery, the horn sings lovely! I must be missing something simple, however for the life of me I can not work it out...

Hi guys, Took advantage of dry and cool day to get the car out for a once over. (How not to please the wife) Throughly enjoyed myself. I'm not sure about anyone else, most car play time is spent in the garage under artificial light or of an evening. So it was great to get it out in the open...

So ive had the 5 now for just a little under 4 years ive had my ups downs and in betweens but gradually slowly cracked on with the motor so thought id throw some pics together of the progress slow as it is .... fingers crossed it might get finished this year

Hi All, It may be time to move on... I am now considering selling my Renault 5 GT Turbo EBS Convertible. It's very rare, being one of only 14 made in Right-Hand Drive and one of the earlier type (the car was cut down to the bare floorpan and built up with custom rear quarters, doors, etc...

I have a full interior plastic set from my GTT going spare as have swapped to campus parts as partially stripped and never going back to std. Also have interior grab handle set and sun visors from campus. Not sure if exactly the same as GTT. Full set of rear seatbelts in vgc with all hardware...

Is this the correct clutch that people sell as an uprated part for c1j's or is it different, I ask because its quite a bit cheaper than the kits advertised as 5 gt turbo upgrades VALEO Clutch Kit Volvo 480 E 1.7 Turbo

After having low compression readings and oil contaminating the plugs I decided to rebuild the engine. Need new rings but not sure on what to get. I have Iasa forged pistons and steel liners. Was thinking Total rings, are these going to last with the steel liners? Can't find an answer to...

Has anyone attempted to fit Clio RS calipers to a gt turbo? Is it possible, bracket and disks to be used?

Hi, I currently have my engine stripped and have been looking over the items when I noticed my camshaft has "B P 285 T" stamped on the end of it........ Is this possibly a piper 285 cam? If it is then I will want to get the vernier pulley and dial it in properly. I knew the lump had previously...

Hi there I'm a new member here. Recently brought a raider, after wanting one for 10 years. I'm trying to get it back to as close to standard as possible. With a lot of help from Mike at G t turbo spares, I'm well under way. I want to get the B pillar badges fitted, however have yet to work...

The time has now come for me to part with my Renault 5 GT Turbo Race Car that I have owned and used for TurboRenault track/club events. I've now decided to sell this car as I'm currently in the progress of my 11 Turbo project, and want to commit to finishing that. CAR IS LISTED ON EBAY This...