head

OK so the F7P specs go 30Nm, 50Nm, slacken off, 25Nm, 108degrees But the F7R specs do the same, but then afterwards an extra stage of running the engine to temperature, cooling, then slackening off and retorquing to 25Nm, 107degrees. Question is, why the difference? It's essentially the same...

Ive a supervan with a knackered non turbo engine.i can get my hands on a 03 trafic dti engine and just wondering if the non turbo head will suit dti block? the bore & stroke are the same on both engines but the compression is lower on the turbo engine.does the head itself govern the commpression...

wheres the best price for head gaskets and bolts at the mo? last time i got a victor reinz one off benver but they're saying unavailable currently. also i asked this before but cant remember what the answer was..... cam you get the cam out without taking the head off?

Hi. Can anyone suggest where I might be able to source a set of head bolts for a 21TXi? They are M12 x 1.5 x 185, Ext. Torx. Cheers.

Hello from Greece.... Thinking to fit a 12v head from TXi...Is it possible or should i go for a free flowed 8v with a high lift cam??? Thanx.

I've got one spare. came off the cabbie in 2007, it's done nothing since. I think it's a Ph1 head also, not sure as it's tucked up sleeping in a Epson printer box. :lol:

I've discovered that there's water coming out behind the trim that covers the nuts for the rear hatch.. removing said trim reveals quite some rust, unfortunately, but that's no wonder if there's moisture trapped in there :-( It's not coming in through the hatch gutter since there's no holes or...

megane f7r head Location Country: UK County: NOT SPECIFIED Price £75 Description 2.0 16v megane f7r head with cams. Collection from Norfolk area preferred but I can post at buyers request. Good solid head with no cracks or obvious defects.

who can recommend the best service in Ireland for Head & Block/crankshaft skimming? Thanks

Hi all, I have to do the head gasket on my 21 Turbo, its years since I did a head gasket so before I start can some one please tell me.... 1: When I leave the head into be skimmed should I remove the valves? 2: Also when I remove the head bolts does the rockers lift away from the head? 3...

Been busy last week or two doing the head gasket and bits on my quadra. Also cleaned up rocker cover and bits. Took a few pics was meaning to take more but forgot to. Almost all done now just got to fill engine with cheap oil and run for 20 mins, drain out and refill with good stuff. Take rocker...

ph1 valver head Location Country: UK County: NORTHAMPTONSHIRE Price £offer Description polished and ported r19 ph1 16v head

Does it fit? Also, does anybody know which F3P/R engines have chain driven oil pump? Thanks in advance.:) David

Evening fellows, When Dan and I fitted the HG on the Coupé back before christmas we of course revised the procedure in the old Haynes after checking on here what the pattern was. I was wondering whether with these particular engines if the re-torque after bedding in was recommended. The old...

as above, wanted asap. doesnt have to be mint but im going to rebuild it antway, dont need cams either what you got peeps?

Before my gordini turbo goes back on the road is there any way of preventing head gaskets going pop! I keep hereing horror stories about it from customers who come in & see my R5. Is it true? :? Having nothing to do with the R5 turbo up untill now any advice would be helpfull. Joe

I cant find one and I cant be arsed to go out in the cold. Someone must have a close up of a speedo cable head fitting (cable, not the speedo itself) Please!?

Has anyone seen anything like this before? http://www.migweb.co.uk/forums/engines-transmission/287968-grooves-head.html I was quite surprised to read about it, but the further in you read (with the various cross links to other threads) the more benefit they seem to have had.

Hi there, I made my plans to bring my r19 16v to UK, so I arranged some repairs for oil burning engine. It turns out that engine block is badly worn and needs changing. I'm considering buying F7R 710 engine and putting it to my R19. So does anyone successfully merged head from F7P and block...

Hy pals, how are you? ;) I have a question, wich of this two heads completes (with cams and everything) makes the engine faster? Do you understand what i mean? I ever thought that F7R head was better, but i've readed here another thing, what do you think? Thanks and best...