Whell Centre caps PH1

[Russcook]

Hi, does anyone know where I can get a alloy centre cap from? I've lost one! Phase 1 17 inch standard alloys. I measure it at about 54mm, all the renault ones I've seen are bigger, 57mm to 60mm. Do we have an odd size? Thanks

 

[Kett]

Cheapest (and arguably best) option is to use fake ones and ask your alloy wheel restorer to paint.

I was working with SGM on this and he found a good source. They wouldn’t exactly match OE but having a batch made and selling the originals is sensible. I estimated the cost of x12 would be £150.

Alternatively, I happen to have x3 originals (in packaging) if you want to purchase. £40 each.

 

[Russcook]

Ok, thanks, I will look into aftermarket and get a set. I see Mini ones are 54mm to.

 

[SimonLM]

I made some out of Espace units turned out well

 

[Shutler]

Cheapest (and arguably best) option is to use fake ones and ask your alloy wheel restorer to paint.

I was working with SGM on this and he found a good source. They wouldn’t exactly match OE but having a batch made and selling the originals is sensible. I estimated the cost of x12 would be £150.

Alternatively, I happen to have x3 originals (in packaging) if you want to purchase. £40 each.

I don't suppose you have any for a Phase II by any chance?
one has decided to give up on me

 

[SimonLM]

The Espace ones are like £10 each and easy to get them to fit tighter then the original ones.

 

[Kett]

Cheapest (and arguably best) option is to use fake ones and ask your alloy wheel restorer to paint.

I was working with SGM on this and he found a good source. They wouldn’t exactly match OE but having a batch made and selling the originals is sensible. I estimated the cost of x12 would be £150.

Alternatively, I happen to have x3 originals (in packaging) if you want to purchase. £40 each.

I don't suppose you have any for a Phase II by any chance?
one has decided to give up on me

Sadly, nothing spare.

I vaguely remember that Ph2 ones are the same size as 172(facelift)/182 but a different finish.