Quadra zorsts.

[phil21turbo]

fair enough, too far away for me to be honest..
was just after an average on what people pay for custom made exhausts etc

Dan theres a place in West Drayton called edwards motorsport. Young guy, very polite, and been welding since he was 13!!

Heres their website http://edwardsmotorsport.com/index.htm

He done my down pipe....

 

[danb]

how much for the DP?

welding since he was 13 is..to say the least an advantage over all of us LOL

 

[phil21turbo]

It cost me about ?130, but my oil filter seal did break its seal and **** 5litres of oil all over his workshop floor :icon_redface:

Best thing is to take the car up there, and ask him for a quote :icon_wink:

 

[danb]

i feel it wont be cheap

bet he was please your car decided to poo itself! must have been home sick

 

[DaveL485]

Dave, the one just after the center uj on the prop shaft? or are you trying to take it over the axle?

Yeah the one that the prop goes through as well. You'll never get it over the axle without comitting suicide lol. Thats why the scorpions for Quadra's were the same diameter as the std system.

Good to know people have been building working "non rattling/knocking" systems cuz I'm gonna need one at some point.
Who's got Matty Cuningham's old blue flame pipe then? I borrowed that one from Mike Stevens a while back to try on mine for fit. That seems to be the one thats being cloned and the best system for a quadra.

See the pics I posted. Tidy bit of kit innit?! Coupled with the ExtWG it's a killer :icon_biggrin:
Dan- Its back out to play asap, hope by end of March for pre-la chatre testing. I aint leaving it till last minute this time and my source for 'MOT-by-post' is no longer available lol

 

[Mattfletcher]

Dan- Its back out to play asap, hope by end of March for pre-la chatre testing. I aint leaving it till last minute this time and my source for 'MOT-by-post' is no longer available lol

My mate with the turquoise quaddie is an mot tester, my blue one went straight through the mot. lol. He was going to do a log book mot on it, but we had nothing in the following day so we took it to work and tidied up some loose ends while it was there. And the Evo past aswell.

 

[devonquadra]

Yeah the one that the prop goes through as well. You'll never get it over the axle without comitting suicide lol. Thats why the scorpions for Quadra's were the same diameter as the std system.



See the pics I posted. Tidy bit of kit innit?! Coupled with the ExtWG it's a killer :icon_biggrin:

Yea that looks like a nice job I like it, only thing I worry about is the "under the diff" bit, I live out in the sticks down some real rough old lanes and I dont wanna go n wreck it.

 

[DaveL485]

Yea that looks like a nice job I like it, only thing I worry about is the "under the diff" bit, I live out in the sticks down some real rough old lanes and I dont wanna go n wreck it.

Ha ha, I'[ve knocked the front a few times but never the back, and if I ain't done it, i'd say it's pretty safe LOL

 

[johnspin]

i've recently had a exhaust system done for my quadra,i got a 3" downpipe , to flexi joint then 2.5" all the way to back with one box, and it goes over the axel, just:icon_confused: ,all in stainless steel cost 400 quid