Megane Project: MRS2: Water Intercooling & elec. Pop Off Steering

[arno samimi]

a small gimmick:
first system:
because the cleaning I no longer need the headlight cleaning system.
therefore I have the system used for a water cooling of the intercooler, and it's controlled depends the boost pressure.
so the water consumption is kept within limits.
second system:
electrically switch between original pop off valve and the open hks pop off.

regulatory strategy:
the hks pop-off can be operated alone, or in combination with the water cooling of the intercooler.
but in return, the water cooling not alone.
the immobilizer diode still blinks as usual. of course, also at ignition off etc.

here shown in pictures:

system off / original pop off valve active:





hks pop-off active, original pop off valve inactive & intercooler water cooling off:





intercooler water cooling on / standby & hks pop-off active, original pop off valve inactive:





intercooler water cooling active & hks pop-off active, original pop off valve inactive:

 

[arno samimi]

 

[andybond]

I am liking the use of the wiper stalk !

Leerlauf Einstellen - engine stopped ?

 

[marcel]

I am liking the use of the wiper stalk !

Leerlauf Einstellen - engine stopped ?

leerlauf is idle rpm set dont any of you know German whahaha

 

[andybond]

leerlauf is idle rpm set dont any of you know German whahaha

Nein

( I know how to ask how much pocket money you get , I have diarrhoea , and pedestrian zone in German then that is my lot ! )

 

[arno samimi]

leerlauf einstellen means literally idle or standgas adjust, that is: "adjust idle" or adjust standgas.
but it means really: bring the gear in neutral (before start).
it comes when only the ignition is on before start the engine.

 

[andybond]

Thanks for the explanation. Slightly different to my r26.

 

[arno samimi]

Thanks for the explanation. Slightly different to my r26.

I think it's country or coding dependent...