There is more to life with TurboRenault.co.uk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • This section contains the archived boards. They should be read only. If you want a thread resurrecting please message admin and we can move into the live section

hub assembly's for the R5 GTX

steveL

Member
I am going to rebuild my R5 GTX and need to know about hub assembly's. I know that the R5 GTT and the Clio RSi has the same hub assembly's as the GTX but what about the R19 16v and also the clio 16v will the hubs off of these also fit and are there any other cars that you know of that will fit? If anyone has any hub assembly's that they wish to sell to fit my car then please PM me im also after some caliper carriers for a big break conversion too.

Thanks

Steve
 
As far as I am aware all the hubs are the same. The only differences come with the shock bolt spacings which can be either 52mm or 54mm.
 
Cheers Ben i knew about the different spacing's for the damper bolts the GTx has 54mm spacings. just needed to make sure that there are no other differences in the hub assembly's.

Thanks

Steve
 
the 52/54 mm spacing and the bearing size (65/72mm) are the only differences.

cars you want to be looking at

clio's, 5's, 9', 11's, 19's thats it.
 
Brilliant cheers for the help on that one. i take it that the R19 valvers and the clio valvers will use the larger bearings.

Thanks

Steve
 
Chris just checked it out and the one's that will fit are the R19 16v, clio 1.4 + RSi, R5 1.4, GTX, GTT

Clio Valvers apparently use different bearings to the cars mentioned above.

Thanks
 
Back
Top