There is more to life with TurboRenault.co.uk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • This section contains the archived boards. They should be read only. If you want a thread resurrecting please message admin and we can move into the live section

help please

chris5

New Member
hi
change the thermostate and heater metirx and bleed the system know inside the car fan not kick in car is not right
any help please :x :cry:
many thanks
chris
ps need the car sorted
 
Sounds like an AIR block to me...... have a feel of your hoses see if they are cold in certain area especially the heater ones....
 
chris5 said:
hi
change the thermostate and heater metirx and bleed the system know inside the car fan not kick in car is not right
any help please :x :cry:
many thanks
chris
ps need the car sorted
you say fan not kicking in do you mean radiator fan?
have you put the new thermostat in the right way round, ie with the sticking out bit pointing out the end of the hose?
if your not getting heat inside car is the interior fan working?
if interior fan is working are the cables that operate the change from hot to cold ect from the dash swithes to the heater matrix correctly connected to matrix and actually moving the mechanism on the matrix?
have you tested the wiring to the rad fan switch? bearing in mind its switched earth not switched live!
as phildini says check all your hoses are getting hot which will detect possible air lock,, remember to allow time for thermostat to open..
if your wiring to and your rad fan switch are good and fan still wont work you must have a blockage/air lock.
i would try flushing the rad but it would have to be pretty grim to get that much crud in it.
 
Back
Top