EBC Redstuff pads

[looch]

Anyone know the cheapest place to get these? Im after a set of fronts AND backs...cheap as possible please :approve:

I heard Camskills did em for a good price and free postage but when i looked they were alot more and the postage was dear too

[smilie=icon_cry.gif]

 

[Jamesv6]

Try LINK

and http://www.brakes4u.co.uk/itemdetail.asp?catid=11918

There's a members discount code in the members area

 

[renaultalpine]

If you can't hold on until I try to order some more in ebcdirect are often OK.

Camskill used to be the cheapest. They were the ones I had to beat for the group buy.

 

[Steve-V6-D61]

Hi

Brought my red stuff pads from Camskill front and rear

Been doing some research on brake pads, in the Renault manual its says min pad thickness is 9 mm but on the AP product info it says 2.5 mm looks like a good way of Renault fitting new brake pads well in advance of when there needed according to AP.

AP part numbers for calipers are CP6605-80S TWR and CP6605-9SO TWR

Clio front pads are the same as
Morgan Aero 8 4.4 2000 on
Noble M12 3.0
TVR, Cerbra, T350, Tuscan etc
Seat Cupra Sport (model ?)

PRICES AND PART NUMBERS FRONT PADS

OMP OT8104 road and sport £55 EBAY
Mintex xtreme MDB2207X £51.06 from A to Z motorist centre

EBC Redsuff DP3036C £74.65 inc or £82.55 plus £5 post ebay
Ferodo DS2500 FRP3083H £82.60 inc
Mintex M1144 MDB2207M1144 £98.20
from Camskill performance all plus post £8

Padgid 20345 about £190 !
Ferodo DS3000 FRP3083

Brake pad retaining pin and wear plate kit available from SEAT, but are AP parts, part no 6LL698295 @ around £60, but dont know what wear plates are ! Do now,they are the 4 stainless plates screwed to the caliper at each end of the pads, should not need replacing unless damaged.

Waiting on a price for retaining pins direct from AP GROUP BUY ANYONE

REAR PADS

Mintex MDB1526

Rear pads are also for Citroen XM all models FRONT FITMENT


Hi

These retaining pins can be very rusty after a long period, I had to use a wire brush on a drill and tap them out a bit, then rotate them bit by bit and clean them all up before they would tap out though the other side of cailper, I have cleaned and painted them but there still not great, but for the cost of £1.77 each, I have brought some new ones.

You should think about these if you are looking to do the job in one go, I have read on the Cupra forum that some people have wrecked their pins getting them out.

2 sets of 4 x CP6600-109 pad pins are in stock at

For B G Developments Ltd
Unit 9 West Court
Buntsford Park Road
Bromsgrove
B60 3DX
Tel: 01527 873716
Fax: 01527 575403
E-mail: [email protected]

 

[Brett]

Have you tried EBC themselves? Its a local firm to me and they have always done me great deals on brakes and clutches.

 

[Mark]

EBC Redsuff DP3036C £74.65 inc or £82.55 plus £5 post ebay
Ferodo DS2500 FRP3083H £82.60 inc
Mintex M1144 MDB2207M1144 £98.20
from Camskill performance all plus post £8

Regarding the standard mintex pads, Mintex M1144 MDB2207M1144 £98.20, pretty sure these are the same for £20?

http://cgi.ebay.co.uk/Renault-Clio-Fron ... 53e446c5c9
or
http://cgi.ebay.co.uk/MINTEX-BRAKE-PADS ... 2eabd3d667

 

[Ali]

i prefer the mintex pads to the red stuff ones i have currently. The stopping performance is better with the mintex and they also don't stick out like a sore thumb.