There is more to life with TurboRenault.co.uk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • This section contains the archived boards. They should be read only. If you want a thread resurrecting please message admin and we can move into the live section

Clio V6 Trigger pattern

allye

New Member
Hi guys,

Just a quick one, I'm talking to Emerald at current about them programming a drive by wire capable ECU for me. They need to know the trigger pattern for these cars, I had a search but it was unproductive!

Any one know it off hand?

Thanks, Ali :approve:
 
The trigger pattern is located on the flywheel. I have a trophy flywheel in the garage so ill check when i get home fella.
 
Good choice regarding ecu by the way. Emerald is what i shall be using on mine although mine will obviously be for an audi lump. Are they supplying you a complete engine loom and base map for the L7X? Might be a good development for a fair few owners on here.
 
Thanks for that, appreciate it.

I'm undecided between DTA and Emerald at current. They will only be supplying the ECU and the short wiring loom ready to wire up to the clio loom. Unsure who is making the loom for me at the min, it will either be Mile at Pug Racing near Salisbury. Or Sandy Brown down in Cornwall as he will be mapping it.

I contacted Emerald reference the drive by wire and they said they can program it in fine as long as I send them a pedal and throttle body, once they have the information from that other Clio V6 owners will be able to buy without that hassle!
 
Back
Top