There is more to life with TurboRenault.co.uk
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Brake Proportioning Valve
- Thread starter Gentle Ben
- Start date
Wicked Neo
I visit now and then...
I see Sparky is resorting to swear words and racisim, the usual route of the ignorant.
Chris H
master of boobies
aye very good despite the fact all he said was it was of no use which it isn't.
The question was does his 1.4 have a bias valve? No it doesn't none of them do.
Micks ignorance on this subject is what caused the argument
The 16V bias valve is no use at all for bens application. If his car dives so much when the conversions done then he needs to set the suspension up properly.
However stan who decided to have a pop at me for no reason apparently, is indeed correct due to the 4 pots needing a lot more juice to shift them the bias will have ot be heavily set to the front to maintain a desired braking effort from the vehicle as a whole.
racism? hes fecking english as close as dammit
The question was does his 1.4 have a bias valve? No it doesn't none of them do.
Micks ignorance on this subject is what caused the argument
The 16V bias valve is no use at all for bens application. If his car dives so much when the conversions done then he needs to set the suspension up properly.
However stan who decided to have a pop at me for no reason apparently, is indeed correct due to the 4 pots needing a lot more juice to shift them the bias will have ot be heavily set to the front to maintain a desired braking effort from the vehicle as a whole.
racism? hes fecking english as close as dammit
Gentle Ben
Vee-Man
Sparky regardless of where you stand and how you wish to participate on the site, I have to say that in my experience of you so far, and the topics you have chosen to interject in that you have done nothing except demonstrate the fact that you're a clueless moron.
You seem to wade in on many topics with a supposedly superior point of view but in all seriousness do you honestly expect to be taken seriously as someone who was adamant that Energy engines didn't run a distributor ignition setup?
Get real.
As folk go I'm usually as passive as you like but it's obvious that a fair portion of your posts serve no purpose other than to rile people who have a lot more knowledge and experience on certain subjects than you do.
If you have trouble engaging in opinion, and being receptive to ideas other than you're own, then move to another forum. I think I speak for a lot of people on here when I say that we don't want it here.
You seem to wade in on many topics with a supposedly superior point of view but in all seriousness do you honestly expect to be taken seriously as someone who was adamant that Energy engines didn't run a distributor ignition setup?
Get real.
As folk go I'm usually as passive as you like but it's obvious that a fair portion of your posts serve no purpose other than to rile people who have a lot more knowledge and experience on certain subjects than you do.
If you have trouble engaging in opinion, and being receptive to ideas other than you're own, then move to another forum. I think I speak for a lot of people on here when I say that we don't want it here.
Last edited by a moderator:
LOL
Chris, wasnt meaning it to look as if i was having a pop at you...
The argument started cos spacky couldnt get his "wee" head around how this car will need a bias valve, the fact that the car had one originally is neither here nor there. I suggested a bias bar set-up as it can be easily be a solution for the master cylinder relcation issue.
Chris, wasnt meaning it to look as if i was having a pop at you...
The argument started cos spacky couldnt get his "wee" head around how this car will need a bias valve, the fact that the car had one originally is neither here nor there. I suggested a bias bar set-up as it can be easily be a solution for the master cylinder relcation issue.
Last edited by a moderator:
bidderman1969
detailer
i bet you wished you never asked now Ben, lol
i must admit that i never try to force my opinions on anyone, in fact, i always use this site to further my knowledge on the 19's more than anything, and must admit that i have learned a hell of a lot from being part of this website!
i must admit that i never try to force my opinions on anyone, in fact, i always use this site to further my knowledge on the 19's more than anything, and must admit that i have learned a hell of a lot from being part of this website!
Gentle Ben
Vee-Man
I'm the same bidderman, picked up loads from watching folk work on cars and from the advice that gets given out on forums.
Sadly Sparky seems unreceptive to people with a difference of opinion but the only advantage I can see of that is to pray he fixes his own car inline with his own incorrect advice, thus accelerating the means of his demise from this world and improving the gene pool for future generations.
I'm sorry that was harsh, I do apologise....
A little bit.
Seriously though, I would never wish death upon anyone really unless they had done something seriously sick or personal. I just hope Sparky can learn to receive advice as well as he tries to give it.
Sadly Sparky seems unreceptive to people with a difference of opinion but the only advantage I can see of that is to pray he fixes his own car inline with his own incorrect advice, thus accelerating the means of his demise from this world and improving the gene pool for future generations.
I'm sorry that was harsh, I do apologise....
A little bit.
Seriously though, I would never wish death upon anyone really unless they had done something seriously sick or personal. I just hope Sparky can learn to receive advice as well as he tries to give it.
Gentle Ben
Vee-Man
If fucking turds does it for you Stan, don't let me get in your way fella!
bbracer16valver
Active Member
:lol: man it never gets worse only better on here 
sparky33
Active Member
I'm the same bidderman, picked up loads from watching folk work on cars and from the advice that gets given out on forums.
Sadly Sparky seems unreceptive to people with a difference of opinion but the only advantage I can see of that is to pray he fixes his own car inline with his own incorrect advice, thus accelerating the means of his demise from this world and improving the gene pool for future generations.
I'm sorry that was harsh, I do apologise....
A little bit.
Seriously though, I would never wish death upon anyone really unless they had done something seriously sick or personal. I just hope Sparky can learn to receive advice as well as he tries to give it.
What a gobshite you are, HND Engineering/Motor Vehicle Studies and RTITB levels 1,2&3, that's what I have, what do you have Ben?
sparky33
Active Member
At least a turd is solid, unlike you piss boy.nah fuck him....he's a turd
Chet T16
Active Member
mals
Comic Genius
Similar threads
- Question
