Another Vee Shoot!

[looch]

15mm spacers rear... Soon to be 10mm on front once the H&RS have been modified...note to all, 10mm H&R spacers are made wrong and will need modding

Sophys kept back my faves for the time being

 

[ColinG]

I quite like the wide rear, standard front stance!!

Take it your coilovers aren't much lower than standard height?

 

[looch]

at their highest, they are 10mm lower than standard. mine are currently wound all the way up to this setting, but im running 35's on the trye profiles so although the car sits lower, the arch gap has increased slightly. To compensate for this once I fit the front spacers. i will bring the KW's down 5mm all round. :approve:

that should mean that im 15mm lower than standard on the suspension plus an extra 5mm lower from the tyres

 

[ClioSpyder]

at their highest, they are 10mm lower than standard. mine are currently wound all the way up to this setting, but im running 35's on the trye profiles so although the car sits lower, the arch gap has increased slightly. To compensate for this once I fit the front spacers. i will bring the KW's down 5mm all round. :approve:

that should mean that im 15mm lower than standard on the suspension plus an extra 5mm lower from the tyres

I should have the same set up on a couple of weeks when I pull my finger out and fit my KW's.........already have 35's fitted to the Cromo's but a little worried about how the clearance will be on the rear arches.

Although a couple of the Guys on here seem to run Cromo's and KW's no problem ????

 

[ClioSpyder]

Looch, front splitter - could you give me some details - very nice.

Hoogi, speak to me
Or pop round and you can make your own :rofl:
Have a look hereLINK

Hey Russo,

Forgot you were a talented Man.............so another one of your Masterpieces.

I actually thought it was Carbon Fibre at first glance.

And yes, once I'm up and running I'll drop in to meet up :approve:

 

[looch]

Looch, front splitter - could you give me some details - very nice.

Hoogi, speak to me
Or pop round and you can make your own :rofl:
Have a look hereLINK

Hey Russo,

Forgot you were a talented Man.............so another one of your Masterpieces.

I actually thought it was Carbon Fibre at first glance.

And yes, once I'm up and running I'll drop in to meet up :approve:

It nearly was

 

[Ali]

What's the score with the front spacers? Why do they need modified!?

 

[GTTurbo]

The flange face on the front hubs sits out more than 10mm so the hubcentric spacer doesn't fit against the hub face.

 

[Ali]

Is this the same with all spacers? Or just with the above?

What's the remedy?

 

[looch]

Go for 15mm All round Ali

 

[Ali]

Will that not be very wide?

 

[ColinG]

That would take the fronts into negative offsets lol.

I'm planning 15mm rear and 5 fronts

 

[GTTurbo]

Is this the same with all spacers? Or just with the above?

What's the remedy?

Just 10mm if hubcentric.

Remedies:

No spacer, 5mm flat hubcentric, 15mm or 10mm and get the grinder out and trim 5mm off the face

 

[Ali]

Did you get this sorted fella?

 

[looch]

15mm rears - None on front...

Thats how I roll... :salut:

 

[Ali]

Because you gave up? or prefer it without?

 

[looch]

Lol gave up !

 

[Big Iain]

I don't know if I'm gonna fit my spacers now, haven't tried them on but 15mm will be close to bodywork I think.

 

[EEE007]

19mm on ph1 rear and clears with 17 wheels


Iain

 

[looch]

I don't know if I'm gonna fit my spacers now, haven't tried them on but 15mm will be close to bodywork I think.

Not at all mate