There is more to life with TurboRenault.co.uk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • This section contains the archived boards. They should be read only. If you want a thread resurrecting please message admin and we can move into the live section

2 Piece Grooved Discs

Status
Not open for further replies.

Blueboy

New Member
Anyone interested in some 2 piece grooved discs?

Details are as follows:

Kit comes complete with 2x330x32mm Rotors, 2 x Alloy Bells and 24 Bell to Rotor Fixings. Due to the inherent warping problems associated with one piece discs we have produced a two piece solution by marrying two first class products - PowerVane Rotors & Compbrake Bells. * High Quality racing rotors by Power Vane. * HE 30 purposed designed aluminium bell. * Pre Torque fixing for direct replacement. * Brake fade virtually eliminated. * 40% weight reduction. * Faster heat dispersion. * Superior Performance Braking. * 4 gas vent design. * Long life wear rate. * Highly recommended for circuit racing & track days. * All top hat (bells) hard anodised in gold silver Black or blue to 50 microns. 2 piece discs the better option: * Superior stopping performance (shorter distances for stopping) * Improved resistance to fade over1 piece discs brakes. * Better resistance to water flooding (self-wiping) * High-torque development from a more compact and lighter package. * Efficient heat dissipation due to the open construction * Better performance in wet & dirty conditions, since disc brakes are self-cleansing; leads to more uniform braking action. * Greater performance stability throughout the pressure /temperature spectrum of the brake pad combination. * integrates with developing features of advanced electronic controls like ABS (Anti-lock Brake System) Bell to disc (rotor) fixings Mounting to rotor is done using 12.9 grade cap head screws with a plain shank, plated for protection to JS500 & stress relieved. Heat resistant cleaved locking nuts and plated washers. Supplied in sets of 16 & 24.

If we can get 5 people together I am sure that I can get a discount - likely to need at least 5 people though. Cost likely to be around 350 pounds to your door.

[album]1136[/album]
 
I have spoken to the manufacturer who confirmed they would fit with standard calipers.

If we can get 5 together - I will get them fitted to my car first to ensure they fit.

Paul
 
Thanks Paul, would just prefere more of an OEM type of look to them but ill still be interested even if not.
 
I would be interested if its a straight swap from the standard disks i have in situ. Basicly if its like for like, is their any difference between mk1 and mk2 ?

JRP
 
This could be a successful group buy - subject to the price point you mention :-)

I would prefer drilled disks or dimpled but wouldn't want this to affect reliability so defer to the manufacturers recommendations, grooved (as in the picture) would be OK failing that ...

Martin
 
Status
Not open for further replies.
Back
Top