There is more to life with TurboRenault.co.uk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • This section contains the archived boards. They should be read only. If you want a thread resurrecting please message admin and we can move into the live section

whats the lenght of the standard wheel nuts

f6f5b4cf684ca9df1603f80f4f9c50c5.jpg

8bbcb0041c313e3c3a6b71860b166901.jpg
 
Last edited by a moderator:
Bolts on the ph1 and ph2 I think are the same but you need spacers to fit ph2 wheels to the rear of a ph1. You can use ph1 front bolts on a ph2 front alloys.
 
Cheers James that's all sorted now. Just going back to that side pod, I can't see the bottom bolt to tighten it. I can get to the top one but that is tight, any more ideas at all. To be honest I'm toying with the idea to give the car to a specialist just to give it a good check over(inside and out) just to get piece of mind, as I've noticed a few things and just wondered if they could be sorted. Who would you recommend?.

Cheers
 
You need a long thin driver to go through the pod grill, it's right at the back. Shine a torch in there and you'll see it. (unless it's missing of course)
abd0181f9548e0c5ca666ba636ec280f.png


I take mine to Scott at SG Motorsport he is basically Mr Vee. Many of us use Scott. Based in Chippenham but worth the journey.
 
Last edited by a moderator:
Back
Top