stock Front lower pan installation question

[CdnR5T2]

Hi all,
Newbie to the Clio v6 Ph1. I had a custom splitter put on my car and I was not use to it and
damaged it only to decide to replace with the stock one. Better for clearance and easy for me
to get out of the driveway. I went through the manuals (which were great) and did not find
the proper diagram for installation and proper hardware. Can someone that has taken their
front bumper off comment if I am correct on the stock installation?

Does this look correct?

Can anyone be so kind to take a photo of the inner wheel housing and how it's attached to the
lower pan. Also, now that I have damaged the mounting holes I wlll need to reinforce them and
fill them back to redrill for the stock mounting screws. What is the best material to use to repair
RTM? Is Upol Fibral glass repair any good? Any help is greatly appreciated.

Leo

 

[Jamesv6]

[mention=4264,#0000FF]rustedandrotten[/mention]. Has removed bumpers I bet.

Just another pic if this helps

More part numbers

 

[rustedandrotten]

Should be slide on captives and self tapping type screws, should be able to get from Paul Temperton at RPD for OEM or similar from any good motor factors, plastic push ins would not be strong enough and you could end up with the liner coming loose!

 

[CdnR5T2]

Thanks for the post. That is pretty well what I am looking for. Did I miss it in the Technical specs? I realize I might be missing the lower part of the spoiler 6020011245. Where can I get this ? Or am I going to end up scraping it and damaging it anyways. I presume that the inner wheel wells are just attached by body plugs. I also sheared the brass rivet nuts that were attached to the frame of the car. Who might have those ?

 

[Jamesv6]

hard to find one now.


Post from 2011

PH1 have a rubber semi-flexible strip underneath the bumper.

part number 6020011245

£369.46 inc vat

 

[Jamesv6]

http://v6clio.net/manuals/partscliov6part1.pdf

 

[CdnR5T2]

JAMES,

Thanks for the tips. The real problem I am having is how
The splash shield that hangs down in from of the wheel is
How it is attached to the lower pan. I know that there are blind rivets that are attached to the frame that has two bolts that hold up the pan. The splash shield I believe is just connected with plastic plugs. Three small one and one larger one. Is that correct? I don’t see
That viewpoint on any of the diagrams.

The front screws and the two bolts into the rivets should take All the weight.

Leo

 

[Jamesv6]

[mention=62,#000000]scotty6r4[/mention]

I’ve drawn Scott’s attention to this topic.

http://www.renaultcliov6.com/page12.html