There is more to life with TurboRenault.co.uk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • This section contains the archived boards. They should be read only. If you want a thread resurrecting please message admin and we can move into the live section

R5 Ph1 to ph2 strut conversion?

CoooL

Member
Hi guys, i have bought a Renault 5 GTE, but the GTE's have ph1 suspsension. And almost all affordable suspension kits Like the Apex kit are for a ph2..

So there for i would like to know what i need to convert it to ph2 struts..

Of course i need the strut and springs, and the top mounts like the ones CGB have, will the rest fit over from my ph1 suspension?

Thank you for your help :D
 
By phase1 you mean the torsionbar suspension?

If so I dont think you can convert it, in my opinion the torsionbar suspension is way better any way.
 
No i mean the super 5 Gt-turbo ph1 suspension with the damper mounted on the middel Of the strut, i want to convert it to ph2 where the damper sits further in in the strut
 
Hi guys, i have bought a Renault 5 GTE, but the GTE's have ph1 suspsension. And almost all affordable suspension kits Like the Apex kit are for a ph2..

So there for i would like to know what i need to convert it to ph2 struts..

Of course i need the strut and springs, and the top mounts like the ones CGB have, will the rest fit over from my ph1 suspension?

Thank you for your help :D

How do you mean 'the rest'? Do you mean the hub carrier and bottom arms etc?

I don't know that much about 5s but I'd be surprised if they are different.

So just swap the complete strut over.

Or have I misunderstood what you're asking?
 
No i mean what do i need.. i can't se any reason why i should buy a whole gt-turbo front strut, just to throw away the dampener and the springs, if i buy a Apex suspension kit with dampener and springs, I'm assuming the hub carrier and bottom arms etc are the same.
I'm asking will i need more than the top mount, will the ph1 bearing etc fit the strut mount (http://www.cgbmotorsport.net/suspension-top-strut-mount-phase-2-single-327-p.asp) to convert my ph1 struts in to ph2 struts. I'm looking at the apex kit because it is relatively cheap (£250), I'm not wanting to buy a coil-over set (£500+)


Ps I'm sorry if I'm not making myself clear, but I'm Danish.. :)
 
Back
Top