Need help - Injector Flow rate and Dead time for IWP098 2.0 16V turbo

[Amit]

I bought these OEM injectors - i am planning to hook a piggyback ecu in which i need to key in Injector CC (Flow) and injector opening time in ms (at 13.8v) probably in the range of 0.600 to 1.2 ms
OE Einspritzventil Einspritzdüse Düsenstock Injektor RENAULT 2.0 16V 8200058379 | eBay

Does any member know the flow rate and dead time for these Weber/Magnetti Marelli IWP098 injectors. There is no data on these injectors anywhere on the google.

 

[Amit]

Bumping up this thread. Can someone help with the flow rate. I tried hooking them up on the injector testing machine. But the machine doesnt have a feature to calculate flow rate or dead time.

 

[Andyquadra]

do you know what car they are from?

 

[andybond]

do you know what car they are from?

• RENAULT ESPACE IV (JK0/1_) (1998 ccm, 163 PS)
• RENAULT LAGUNA II (BG0/1_) (1998 ccm, 163 PS)
• RENAULT LAGUNA II Grandtour (KG0/1_) (1998 ccm, 163 PS)
• RENAULT MEGANE II (BM0/1_, CM0/1_) (1998 ccm, 163 PS)
• RENAULT SCÉNIC II (JM0/1_) (1998 ccm, 163 PS)

 

[Amit]

Thats right, these are from the 2.0L 16v turbo, I did a 15 seconds 100% duty cycle test and it filled 70 cc fuel in the test tube.
So it sums up to 280cc per minute, not sure if I am correct here

 

[andybond]

Thats right, these are from the 2.0L 16v turbo, I did a 15 seconds 100% duty cycle test and it filled 70 cc fuel in the test tube.
So it sums up to 280cc per minute, not sure if I am correct here

My Finnish is a little rusty , but that looks right

Weber IWP-098
Magneti Marelli 805001399403
Siemens H82064228 (

)
Renault 8200058379

"280cc/min /3 bars /haute impédance.
Weber IWP-098 järn/gul 162 3,0 30 4 2 - 14,4 - - 350" Lainauksia tarkemmistä tiedoista.


Taka-akselin puslat menee todennäköisesti tässä itselläkin vaihtoon, mutta eivät ne onneksi kalliit ole tuolta ebay:stä tilatessa. Sytytyspuolatki tuli englannista Recomolta kolmessa päivässä, joten ei näitäkään välttämättä tarvi yli viikkoa odotella.

 

[andybond]

THESE guys confirm the same

 

[George1166]

Thats all kind of injectors
with the rale flow

Sent from my HTC Desire 628 dual sim using Tapatalk

 

[Amit]

These are Bosch injectors, not Magnetti Marelli right? cant co-relate the part nos with the above mentioned IWP069 injector

Thats all kind of injectors
with the rale flow

Sent from my HTC Desire 628 dual sim using Tapatalk

 

[George1166]

I thinck is all bosh and hitachi injectors


Sent from my HTC Desire 628 dual sim using Tapatalk