Duncan Grier
Well-Known Member
That is borderline vx220 tubby weight 
There is more to life with TurboRenault.co.uk
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Loltus Exige
- Thread starter andybond
- Start date
-
- Tags
- car supercharger
Dont forget mine is the touring edition.That is borderline vx220 tubby weight
It just has no touring bits left. I forgot about those bits that are removed.
New front and rear pads ordered for the car.
I have been advised that the rears are wearing normally but the nearside front is wearing more than the offside. Looks like a dragging caliper.
I have ordered some brake cleaner, a new toothbrush and will shine the piston to within an inch of its life when changing the pads over.
If it all goes to pieces, Ill get some new front calipers. Its almost the same cost as a refurb!
Still psyching myself up for buying 4 new AO52s!
I have been advised that the rears are wearing normally but the nearside front is wearing more than the offside. Looks like a dragging caliper.
I have ordered some brake cleaner, a new toothbrush and will shine the piston to within an inch of its life when changing the pads over.
If it all goes to pieces, Ill get some new front calipers. Its almost the same cost as a refurb!
Still psyching myself up for buying 4 new AO52s!
New pads for the front tonight. Not too much drama.
Everything off. Cleaned up with brake cleaner and everything back in again
Full PPE worm whilst working
Used vs New
Finished
Whilst I was "there" I decided to give my wishbones etc a coat of this
It went everywhere except where I wanted. Nozzle facing upper wishbone. Hits brake disc. Nozzle facing ARB. Hits arch liner. That was fun!
Rears to fit when I muster some enthusiasm. I recall driving out the small rear pin is a PITA
Everything off. Cleaned up with brake cleaner and everything back in again
Full PPE worm whilst working
Used vs New
Finished
Whilst I was "there" I decided to give my wishbones etc a coat of this
It went everywhere except where I wanted. Nozzle facing upper wishbone. Hits brake disc. Nozzle facing ARB. Hits arch liner. That was fun!
Rears to fit when I muster some enthusiasm. I recall driving out the small rear pin is a PITA
