Wanted JC5 089 gearbox

[Clarkey]

Looking for a JC5 089 gearbox,
Condition of gears etc not important as long as casing is good.

 

[Adey]

is that the Ph1 172 box?

 

[andybond]

is that the Ph1 172 box?

I believe so.

 

[Clarkey]

is that the Ph1 172 box?

Yes the phase 1 and the cups had the 089 boxes.
They run a twin taper bearing which will help us.

 

[andybond]

@Clarkey the cups were marked with 129 as the box , not 089. I understand they are the same housing. The exception being the 129 has a longer final drive.

 

[Adey]

wasnt the 089 the only one with a speedo cable too

 

[Renny 5]

089 are ph1 only and have a longer final drive. 129 have shorter ratios as they’re from a cup. Both have speedo cables. I run a 129 in my 5. Very well suited for the car and most tracks I’ve been to.

 

[Clarkey]

I’m just after the casing as they run the twin taper bearings.
I’ve found a 087 which I believe is from a Kangoo.
The question is does it have the same bearing set up as the 089.
I can sort the desired ratios into that box.

 

[Renny 5]

I’m just after the casing as they run the twin taper bearings.
I’ve found a 087 which I believe is from a Kangoo.
The question is does it have the same bearing set up as the 089.
I can sort the desired ratios into that box.

If your on cliosport, northloopcup will know. He’s the top lad for building JC5’s

 

[Clarkey]

If your on cliosport, northloopcup will know. He’s the top lad for building JC5’s

He builds my gearboxes

 

[Renny 5]

He builds my gearboxes

Nice one, he’s built mine aswell mark is a top lad