Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
This section contains the archived boards. They should be read only. If you want a thread resurrecting please message admin and we can move into the live section
Ok so all of a sudden feels like its dropped onto 5 cylinders? Sounds terrible lol, over 4000 rpm the engine light flashes? But goes off before that rpm? Easy fix? Clio phase 1
How the FU*K do you test the rear bank on a phase 1? If i take the plenum off then i cant start engine whilst i unplug each one?! The front bank are fine :rollseyes:
what i used to do on my phase 1 was make sure the easy 3 are all fine, then unbolt the plenum, swap the 3 easy ones into the ones under the plenum, then bolt the plenum down and check the 3 that were originally under the plenum, which are now in the easy bank
Sorted!!!!! Thanks guys front 3 easy, rear, inlet off and all top engine panels, loads of screws! I put the front 3 coilpacks in the rear then put back together. I easy found which one as when i pulled the coilpack on middle rear the top came off! So not an overly difficult job just time consuming. Access is very good with all covers trim off!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.