There is more to life with TurboRenault.co.uk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • This section contains the archived boards. They should be read only. If you want a thread resurrecting please message admin and we can move into the live section

Front & Rear Disc and Bell setup Group Buy

Status
Not open for further replies.
Going by the earlier post, I'm guessing 2 per disc.

eastlmark":32vsylzz said:
Yes just illustrative, and the bells will be drilled for the vee, ie 5 stud/ bolt holes and the 2 countersunk screw holes only.
 
Doh, i was thinking about the bolts that hold the disk onto the bells! OOPS! yeh it is 2 countersunk screws...
 
Ali":deyyb8lq said:
Doh, i was thinking about the bolts that hold the disk onto the bells! OOPS! yeh it is 2 countersunk screws...

the nuts and bolts for these are supplied as the hardware pack. Yes its 2 countersunk screws per disc .....or use the old ones, no ones gonna see them once the wheel is on!
 
looch":6oll8xkc said:
All were made to order so yes I think so pal

Thanks looch, hope there is another GB for these really soon!

[smilie=icon_aaargh.gif] Working away and then realising membership expired! I missed this great buy .....runs away screaming banging head Dobby style
 
^ You can buy mate, it will just cost a bit more...Not HUGELY...just a bit.

I will transfer remaining balance today Stephen.

Ali
 
Stephen i have sent you the remaining balance for

Disks £145.69
Postag £ 15.00
Pads £67.89
Postage £7.50
Bolts x4 £2.00

=£238.08.

Thanks for sorting this all out and i look forward to receiving them asap.

Ali
 
Any time now.

Just waiting on confimration as to which ones will be picked up directly or via Peter and which ones are to be posted.

One set have already gone!
 
Status
Not open for further replies.
Back
Top