Carbon side pods

[Anonymous]

I will be putting some on when I get my wheels from the wheel hospital.
It looks like an easy job, which usually means there is more to it...
Any hints and tips ?

 

[TRW1]

1 bolt straight up at the front.
second bolt through the mesh at the back, about 3/4 of the way up.

Pods are Mk1 mould so Mk2 grills might need some manipulating to make fit....if at all possible.

 

[Chris V6]

I also think that I read on another post that the pods are sealed in along the bottom of them so need to be removed very carefully or the bottom plastic on the pod will crack off.

 

[GTTurbo]

Hi Greeni.......the side pods are screwed with 2 torq screws.......i posted
the topic about the pod being sealed at the bottom but on further inspection
it was due to the bottom 2 plastic fins being previously snapped off and bodged back on!!

 

[GTTurbo]

Greeni dont forget this:

http://www.v6clio.net/forum/viewtopic.php?t=4280

:approve:

 

[Anonymous]

Greeni dont forget this:

http://www.v6clio.net/forum/viewtopic.php?t=4280

:approve:

D'oh !! Too late !!!!
Already purchased !!!

Cheers to all above, it was worth asking then, as I would not of thought they would be sealed along the lower part.

[smilie=thanks.gif]