ABS sensor ring missing on NSR driveshaft

[sbturbo2]

Hi

ABS light came on yesterday on the way to london, once home and after a trip back with no antilock braking I had a quick look underneath and noticed sensor ring was missing from the driveshaft on NSR, I am guessing it is a replacable part after it must have fallen off somehow? Can anyone give me info on a part number and is it a difficult job?

Cheers

Simon

 

[Jamesv6]

From Renault it only comes on the new driveshaft £ 424.25
Part no. 6020011543

A possible supply viewtopic.php?f=3&t=15296

 

[sbturbo2]

Thanks James, I have spoken to Reluctorrings.com and he is a very helpful chap but the listing they have for the vee is a 50 tooth ring. I have counted mine and they are 48 tooth, he will make me a 48 tooth with all the other dimensions the same at the same price on the net Monday or Tuesday for me, good fellow . He stated he had made several for V6 owners from a pattern supplied to him at 50 tooth. Just wondered if you know if a mark 2 has a different setup?

Simon

 

[Jamesv6]

Phase 1

Section 38-10 http://v6clio.net/manuals/chassis.pdf
"CHECKING THE WHEEL SPEED SENSOR
a) Check the resistance of the sensor connection (from the computer to the 2 pin speed sensor).
b) Visually inspect the teeth (48 teeth)"



Phase 2 have 50 teeth LINK

 

[sbturbo2]

Quick update. Just fitted the ring this week and ABS is up and running a treat. Only thing is I had to bond ring on to shaft rather than press fit as per instructions but had no issues

Simon