There is more to life with TurboRenault.co.uk

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • This section contains the archived boards. They should be read only. If you want a thread resurrecting please message admin and we can move into the live section

ABS Fault finding

AndyFielder

New Member
Hello,

Recently bought a valver, the ABS light is on, and i dont know how to fault find. I can only assume its one of the 4 sensors. i have wire brushed all the rings, and still the light.

Fuse is fine.

Do you have any ideas that may help?

Andy
 
like I said check the resistance of the sensors, check them all, the actual figure isn't really of concern as they are rarely where they are meant to be.

But if you get 3 at 800 ohms and one at 5kohms then the 5k is the iffy one.

Have you checked to see none of the reluctor rings have split or shed a tooth?
 
Back
Top