renaultsport megane

Hi everyone, I'm the proud owner of my 2006 Renault Megane Cup in Silver, I've owned it since July 2014 and other than pulling my hair out over maintenance cost, I absolutely love it! Anyway, the reason for the thread title is not long after I got my baby, I had my first crash on the day of...

here we go: engine cover off: removed the shield, lambda sensor and attach turbo / catalyst: removed the under motor hanger, gear oil drained and removed the right axle shaft: removed the axle shaft bearing block and the catalyst already pulled out: removed the middle...

installation integrated into the original engine harness (only one cable new), and a new connector: these accessories lamps aren't flush enough to the bumper recess. doesn't look like oem: therefore an adjustment is necessary, and I modified the holder: reduced by 12mm: grind...

small project in between: same look as the MRS3, now also here for the MRS2: also new brake discs and pads: of course, the trophy lettering will be the same as on the steering wheel cover: here we go: expansion of the pads and discs: mounted the new discs...

fits without problems: - pole connections - fuse box - cable lengths - holder thick on the ground battery / attachment - bonnet closes

...meanwhile, there are nicer original steering wheels from renault as the mrs2 version. thus comes the version of the clio 3 rs in my mrs2. nice grippy and shaped, and somewhat smaller. airbag and cruise control buttons fits without problems: shade of plastic and leather and the grain and...

BPC2 Chip, program cable for the laptop, placebo-plug (if bpc2 should stay away): BPC2 Chip engine harness: BPC2 Chip mapping selector harness (prototyp): greater injectors: headlights bright wide adjuster on the left for the BPC2 mapping program selection (I have xenon...

test mounting: dissemble: parts painted: all mounted without cushion: a part of the perfect fitting leather to the rest of original leather of the MRS2 brought to perforate, and then inked the hole-edge by hand (two zones per seat have two-tone perforated leather)...

all needed parts: removed from above: also from below: already out: fixed on the holder: dissembled is fast: unpacked the ATB, unscrewed the crown: mounted new bearings, screwed the crown: inside and is already turning by itself: mounted...

needed parts: Ipod classic 6.5g 160gb, anthracite, engraved for the provided field of application (is used only for in / the MRS2): navi antenna lengthened and soldered on mass: also the radio antenna, and additionally split for tmc: hidden install, and yes, reception...

a small gimmick: first system: because the cleaning I no longer need the headlight cleaning system. therefore I have the system used for a water cooling of the intercooler, and it's controlled depends the boost pressure. so the water consumption is kept within limits. second system: electrically...

Hi there Here I present our MRSIII project. I will update when we make new things. Engine: Decat 3" RSR Catback 3" RSR Hybrid turbo stage 3 RSR Wastegate GR BOV GR Custom CAI Intercooler Forge (BIG) Forged Pistons Forged Conrods ACL Bearings Helix Clutch kit 875cc Injectors Gas flowed Head...

Well after being without a renaultsport for a year I had a bit of an itch to scratch.... Then along came this fine example of a mercury silver r26. It came with full history & was mega cheap, just what I was looking for. I already had a full r26r interior including full roll cage & number...

Hello everybody, I am located in Romania and I currently own a 2008 Liquid Yellow R26. The car has 40.000 miles and it's in mint condition. A few extras since I bought it: - removed Megane badge - arm rest - short shifter - aluminum knob - DIY intake kit with AEM Dryflow cone and silicone...

Hi. This is my 2005 Megane II Sport 225. I bought it in 2012 and it was look like that: Interior: Specifications for today: ENGINE AND GEARBOX: - Forge Silicone Intake Hose and T-Piece - Samco Sport Anc. Hose Kit - Samco Sport Vacuum and Press Silicone Hoses - Forge Brake Vacuum and...

my megane cup, i know it wont be to everyones taste but i personally love it! the current mods are, rst 3" decat, backbox chop, forge dump valve and blanking plate, pipercoss 200x200 filter and an airtec intercooler, got a few more tweaks to come.

Well I now own 3 Renaults lol this will joing my r5 and Williams It's only a 08 1.4 extreme megane but for a winter runaround it's great, cheap price to. I have taken the 135i off the road now rear wheel drive and loads of horses not the best in the winter. Hoping to get the r5 back soon from...

So I haven't been on here much and have been having trouble finding time to play on track or even on road with ole' red , so I decided to treat myself to a newer easier to live with day to day car and found this :acute.gif:Lol. In honesty it's still very rarely used but it's nice to know it...