renault

So here’s the finished Renault 5 GT TURBO DIMMA It’ll be featured in Octane Magazine later this year and is on sale now on CollectingCars.com Check is out. https://collectingcars.com/for-sale/1987-renault-5-gt-turbo-3

If you want access to my 5 Turbo info, it's all in my Dropbox. MR221 etc https://www.dropbox.com/sh/iimqyc4ov340uvz/AABMlm2vpwdk6bdi-3SnuXKOa?dl=0

Hi! I´m re-organizing the garage and come across parts that I´ve had stashed away for ages. Among the Renault R5 Turbo-stuff there were a few sets of Mahle 80 mm pistons from an earlier R5 Turbo engine build. The sets came as spares with a complete works-engine, all dating back from the 80´s...

Anyone have one for sale? having no luck

not good with computers, had R8S 47 years was 1100, then put a 16TS engine in, then put a 5 GORDINI engine in the 90"s put twin dellortos on it four branch manifold, with A110 exhaust,now bringing it back to life now carbs are playing up, going to put old carb back on but cant find top of carb...

Hi everyone, sorry if this question has been asked before (I did have a quick look) I know some people on here have/are currently restoring R9/R11 I'm debating about buying an early non turbo 11 5 door that will need a lot of work and parts. So the question is are parts easy to get or is it a...

Hi guys, I have inherited a LHD 1995 Renault Laguna Mk1 1.9 dTi Automatic 5 door hatch - 'Barn Find'. I have no keys and no ownership documents at all. The vehicle has been stationary in Croatia since 2009. I would be great to recommission this car if possible. I would like to know where to...

Regrets, I've had a few... It's sadly time to sell 'Whitey', my phase 2 R5 GTT. I've owned it twice since 2007. Sold it to 'Jimmy' in Hungary (for any old skool rtoc members that remember him) around 2011, then bought it back off him Sept' 2012, and had it since. Log-book shows 6x former...

Ok so while not a priority right now starting to look at what I will need to run aircon in my 5 Must be a few euro cars converted? My plan is to retain oem dash but pump will be from engine in the rear and using vag compressor, thinking of reworking fan/heater oem box v what other cars system...

Looking for a standard or after market back box ( But not a massive daft pipe exhaust this is for a phase 1 restoration )

If the oil is low, still visible on the dripstick, will the computer go in to safety mode and switch the car off? The motor turns over but won't fire. Cambelt fine. Would I have too get the EMU reset?

Not my car for a change but i've got this sickly individual in for examinations. First look indicates little or no oil pressure... oh dear! Stand by for further shenanigans :)

I've had this subframe knocking around in my unit at work for a long time now. I bought it to replace the bent one in my car, but found out I had another hidden in the hoard of parts so it wasn't needed. It's nice and solid, just some surface oxidation. Rear engine mount in place. It has lower...

Looking for a few bits Headlights good pair Carb or 32 drtm rebuild kit Shocks or the lower spring mounts Wings Maybe bonnet if it’s straight Drivers rear light

Hi All, Been flying under the radar for a while so thought i would post up my latest project !! As I've got a family now your outlook on cars changes to accommodate this hence I've purchased a 3.0 V6 Manual Avantime. ( Family Car Honest ! ) Its got 63K on it, currently has no clutch as the...

Well maybe not. Just dropped the wife's Craptur in for a GT Line Kadjar. Still a Renault Turbo though 🙄🤣

I’ve bought an 11 gtl , initially a non runner , sorted the carb so runs buuuuut I cant find the pipe that runs from the base plate vacuum and can’t remember if it’s supposed to go to a 3 way t piece crankcase breather with a restrictor ? Any help much appreciated

Hi, I have a basic clio mk4 2014. Was wondering if RS mods will still fit my model. i.e. spoilers, splitters and so on. Cant find any answers on google so i've come here!! Thanks!