meganesport

Hi Mate. I've a strange noise between the gearbox and the engine,where is the dmf can you hear, the flywheel was changed 2 weeks ago, and i heard this noise before We replaced the flywheel. When the engine run idle(warmed up and the rpm is 800-900RPM),You can hear this metallic sound. I...

hi guys quick intro. My name is Scott I live juts outside Edinburgh. I know Andy Bond from the Evo forum and he's persuaded me to sign up on here. After some extended discussions with Andy I have tonight put a deposit down on an R26. Should pick it up on Saturday. R26 by Scott Armstrong...

Hi guys I've owned this Megane for about 2 years now it was standard when I bought it. But since I've bought it I've been building it up to hopefully get around the 300 bhp (for now). The things I've done to it are.... Forge bov K+N panel filter + air box mod Airtec 95 mm intercooler KTR stage 1...

:seriously: http://www.pistonheads.com/classifieds/used-cars/renault/renaultsport-megane/renault-megane-x95-renaultsport-trophy-r-s-s-2015/4325823

This is the intercooler I used http://www.ebay.co.uk/itm/Renault-Megane-RS-225-230-R26-R-R26R-Intercooler-Kit-60mm-/280795600195?pt=LH_DefaultDomain_3&hash=item4160b8d543

This is probably suitable for a pm to @Haz but I thought I might ask here ... Someone painted my R26R spoiler. Badly. To cut a long story short , its shit. The paint bubbled and reacted to the existing paint, some sank , some blister and some split. What now ? sand it down ? With what...

Hello Everyone I want to introduce you a short history of my car project :) 5door Megane 225 2004, Purchase date: 2011 220PS/250lbft (339Nm) Now: 355PS / 338 lbft (458Nm) (1,8BAR to 1,6BAR on dyno, now I have 2,0BAR to 1,8BAR on the road but no graph ;) ) Forged engine: - Wossner...

Hey everyone, My first post! :drinks.gif: I've come to the forum in the hope to get some advice / help / possible work on the following issues on my R26: - Hub bearings - window regulator - steel braided HEL lines - brake squeel! - general health check I've had my car in to a few...

Roughly when i bought the car, i was told it was a press car for fifth gear, only to find out it had also been tested against rs tunings 290bhp megane also. Just a few photos showing when i bought the car, to how it is now going through the progress of making it better.

It's about time I made a progress thread. I've owned the car for almost 4 years and to be honest it's not changed that much. It has mostly been maintenance: Front hubs replaced Both track rod ends replaced All discs, bearings and pads Both side window regulators, looms and switches replaces...

Need help I need to find a rear drivers side caliper

Hi everyone, I'm the proud owner of my 2006 Renault Megane Cup in Silver, I've owned it since July 2014 and other than pulling my hair out over maintenance cost, I absolutely love it! Anyway, the reason for the thread title is not long after I got my baby, I had my first crash on the day of...

here we go: engine cover off: removed the shield, lambda sensor and attach turbo / catalyst: removed the under motor hanger, gear oil drained and removed the right axle shaft: removed the axle shaft bearing block and the catalyst already pulled out: removed the middle...

installation integrated into the original engine harness (only one cable new), and a new connector: these accessories lamps aren't flush enough to the bumper recess. doesn't look like oem: therefore an adjustment is necessary, and I modified the holder: reduced by 12mm: grind...

small project in between: same look as the MRS3, now also here for the MRS2: also new brake discs and pads: of course, the trophy lettering will be the same as on the steering wheel cover: here we go: expansion of the pads and discs: mounted the new discs...

fits without problems: - pole connections - fuse box - cable lengths - holder thick on the ground battery / attachment - bonnet closes

...meanwhile, there are nicer original steering wheels from renault as the mrs2 version. thus comes the version of the clio 3 rs in my mrs2. nice grippy and shaped, and somewhat smaller. airbag and cruise control buttons fits without problems: shade of plastic and leather and the grain and...

BPC2 Chip, program cable for the laptop, placebo-plug (if bpc2 should stay away): BPC2 Chip engine harness: BPC2 Chip mapping selector harness (prototyp): greater injectors: headlights bright wide adjuster on the left for the BPC2 mapping program selection (I have xenon...

test mounting: dissemble: parts painted: all mounted without cushion: a part of the perfect fitting leather to the rest of original leather of the MRS2 brought to perforate, and then inked the hole-edge by hand (two zones per seat have two-tone perforated leather)...